Hitachi GD-2000 manual Removal Procedure, Lens Cleaning

Page 13

GD-2000 Manual 6/18/98 5:26 PM Page 13

Removal Procedure

1.Turn off the DVD-ROM drive and wait at least 15 seconds until the disc stops rotating.

2.Insert the Eject Bar (for example, a straightened paper clip) into the Manual Emergency Eject Hole about

25mm (1 inch).

3.Pull the disc tray.

NOTE: If it is necessary to use the emergency eject procedure to open the drive, the tray should be closed by turning on the power and pressing the OPEN/CLOSE button. Transporting the drive before it has been properly closed may cause damage to the mechanism.

Lens Cleaning

A commercially available “Laser Lens Cleaning Disc” may be used to clean up the pick-up lens of the DVD-ROM drive. Use the Compact Disc Laser Lens Cleaner LLC-1. (by AUDIO SOURCE in U.S.A., by AKUSTIK SISTEME VERTRIEBS GHBH in GERMANY and by SAEC COMMERCE CO., LTD. in JAPAN.)

1)Turn on the DVD-ROM drive.

2)Using the small brush supplied with the cleaning disc case, straighten up the disc cleaning brushes on the back of the cleaning disc.

3)Place the cleaning disc in the disc tray with its arrow marked on the disc at front.

4)Press the OPEN/CLOSE button or push the center of the disc tray lightly and close the disc tray.

5)After about 20 seconds, the pick-up lens is cleaned by the cleaning disc.

6)Press the OPEN/CLOSE button and remove the cleaning disc.

7)Set the cleaning disc in its case with the disc cleaning brushes in the pad hole.

8)Restart the SYSTEM.

GD 2000 DVD ROM Manual Pag

Image 13
Contents DVD Contents For Germany / Für Deutschland For USALabeling Important SafeguardsPower Source Precautions For SafetyCase of failure Installation Conditions Precautions For UseMounting Requirements Cleaning of the DVD-ROM drive, discs Precautions For CareCleaning of disc Mounting screwFront Rear Controls and FunctionsDevice Configuration Jumper Installation RequirementsHardware Installation Software Installation Drive Operation Emergency Eject Procedure Lens Cleaning Removal ProcedureTrouble Shooting Mechanical Dimensions