Hitachi GD-2000 manual Precautions For Use, Installation Conditions, Mounting Requirements

Page 6

GD-2000 Manual 6/18/98 5:23 PM Page 6

Precautions For Use

• Installation Conditions

Do not install your DVD-ROM drive under the following conditions. Dust on the pick-up lens and/or disc, heat or vibration may lead to trouble or negatively affect performance.

In a place where an operation temperature reaches beyond the specified temperature of 45˚C

High humidity locations

In a location subject to extreme changes of temperature and humidity

In a room where dust density is higher than 0.1 mg/m3

In a room that has air conditioning with humidity control which may scatter calcium combinations and other powdered substances

In a room containing exhaust gas fumes such as exhaust gas from gasoline or diesel engines or corrosive gas such as H2S (Hydrogen sulfide)

In a location subject to vibration and jarring during drive operation

In a location subject to sudden shock and jolt during drive operation

Mounting Requirements

Use screws to mount your DVD-ROM drive tightly in the horizontal position. The inclination of your DVD-ROM drive should be within 5û as shown below. The following can occur if these requirements are not followed:

The disc may jump out and be damaged when the tray is opened.

Your DVD-ROM drive may be damaged.

Your DVD-ROM drive may not function at full performance.

 

 

GD-2000 DVD-ROM Manual - Page

Image 6
Contents DVD Contents For USA For Germany / Für DeutschlandImportant Safeguards LabelingPrecautions For Safety Power SourceCase of failure Precautions For Use Installation ConditionsMounting Requirements Cleaning of disc Precautions For CareCleaning of the DVD-ROM drive, discs Mounting screwControls and Functions Front RearInstallation Requirements Device Configuration JumperHardware Installation Software Installation Drive Operation Emergency Eject Procedure Removal Procedure Lens CleaningTrouble Shooting Mechanical Dimensions