Sennheiser SKP 3000 manual Troubleshooting, Error checklist, Receiver to the same, Function

Troubleshooting

Error checklist

Problem	Possible cause	Possible solution
No operation	Batteries are flat or	Replace the batteries or
indication	inserted incorrectly,	check if they are
	accupack is flat	inserted correctly or
		recharge the accupack
Receiver:	Transmitter and	Set transmitter and
No RF signal	receiver are not on the	receiver to the same
	same channel	channel
	Transmitter is out of	Check the squelch
	range	threshold setting or
		reduce the distance
		between transmitter
		and receiving antenna
Receiver:	Transmitter is muted	Deactivate the muting
RF signal	(MUTE)	function
available,
	Receiver’s squelch	Reduce the squelch
no audio
	threshold is adjusted	threshold
signal
	too high
Audio signal	Transmitter	see “Adjusting the
has a high	sensitivity is adjusted	sensitivity – SENSIT” on
level of	too low	page 53
background
	Receiver’s AF output	Increase the audio
noise	level is adjusted too	output level
	low

56