LG Electronics 42WT30MS, 55WT30MS Network Status, Tips for Network setting, Ting the network

Page 25

ENTERTAINMENT 25

NOTE

yyIf you want to access the Internet directly on your display, the Internet connection should be always on.

yyIf you cannot access the Internet, check the network conditions from a PC on your network.

yyWhen you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.

yyIf you do not complete the network settings, the network may not work properly.

Tips for Network setting

yyUse a standard LAN cable with this display. Cat5 or better with a RJ45 connector.

yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or discon- nect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.

yyDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applica- ble terms of service. For details, contact your ISP.

yyLG is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions as- sociated with your internet connection, or other connected equipment.

yyLG is not responsible for problems within your internet connection.

yyYou may experience undesired results if the network connection speed does not meet the requirements of the content being accessed.

yySome Internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection.

yyAny fees charged by an ISP including, without limitation, connection charges are your respon- sibility.

yyA 10 Base-T or 100 Base-TX LAN port is required when using a wired connection to this display. If your Internet service does not allow for such a connection, you will not be able to connect the display.

yyA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub scription to one device, this display may not be allowed to connect when a PC is already connected.)

yyThe use of a router may not be allowed or its usage may be limited depending on the poli- cies and restrictions of your ISP. For details, contact your ISP directly.

Network Status

1Press SETTINGS to access the main menus.

2Press the navigation buttons to scroll to NETWORK and press OK.

3Press the navigation buttons to select Network Status.

4Press OK to check the network status.

5When you are finished, press EXIT.

Option

Description

Setting

Return to the network setting menu.

Test

Test the current network status after set-

ting the network.

 

Close

Return to the previous menu.

ENGLISH

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Monitor Signage Table of Contents Using the Touch Screen Licenses Assembling and Preparing AccessoriesMagnetic sheet Speaker Cable holder Optional AccessoriesSP-2100 Cable Tie NC1000/NC1100 Screws NA1000/NA1100 Cards Media PlayerButtons Parts and ButtonsConnection Panel Connecting the Speaker Using the Mounting Cable Tie Portrait Layout Using the IR ReceiverMounting on a Wall Securing the product to a wall optional »» Only using furniture that can safely support the productVolume Up / Down Remote ControlPower A Button Toggles between numerical and alphabeticalUSB Menu control buttons Navigation buttonsConnecting to a PC Using the MonitorRGB Connection Hdmi Connection DVI ConnectionDisplay Port Connection IR Receiver Connection Touch USB Cable Connection Selecting an Image Mode Adjusting the ScreenCustomizing Image Options Selecting an Sound Mode Adjusting the SoundCustomizing PC Display Options Using the Input List Using Additional OptionsCustomizing Sound Options Mode Adjusting Aspect RatioRGB DVI Hdmi DTVJust Scan Connecting to a Wired Network Using the NetworkSelect IP Auto Setting or IP Manual Setting EntertainmentNetwork Status Tips for Network settingTing the network Close Return to the previous menuConnecting USB Storage Device Using the My MediaTips for using USB storage devices English Browsing Files Button Simple list Blue Convert to Mark ModeMethod to view in 5 large thumbnail or RP,TP,ASF,WMV,FLV Supported file formatMenu Description Play Marked Viewing moviesMark All Unmark AllRemote SettingsEnergy BackMenu Description Video optionsView Marked Viewing photosSpeed Fast, Medium, Slow Photo optionsExit BGMCurrent photo disappears and the next photo appears slowly Transition Effect OptionListening to music Set Audio Play or Set Audio and press OK Tips for playing music files Music optionsViewing the Contents List DivX VOD Registration DivX VOD GuideDivX VOD Deregistration Movie List Using PIP/PBPPhoto List PIP/PBPAccessing Main Menus Customizing SettingsPicture Picture SettingsSaving Level Screen Picture Mode optionsAdvanced Control Audio Audio SettingsTime Time SettingsOption Option SettingsUSB Content Setting Description Tile ModeRecovery Product/ServiceTile Mode Natural mode Tile ModeTop left Bottom left Size Top right Bottom right PositionRGB HDMI/ DVI-D/ DP PIPRS232C cable Picture ID SettingsNetwork Network SettingsHD Receiver Making ConnectionsSpeaker Touch USB Camcorder/Camera Gaming device Display PortComponent Connection External Device ConnectionAV Cvbs Connection Hdmi Connection DVI Connection LAN Connection USB ConnectionGestures and Settings on Windows Using the Touch ScreenTo Use the Touch Screen on Windows To Use the Touch Screen on Windows XP Touch Response to Windows XP  Current Display Settings How to Use LG TDS LG TDS Detailed Function Settings Screen Rotation  Long-press TouchPrecautions When Using the Touch Screen Problem Resolution TroubleshootingNo image is displayed Does the Out of rangeAfter-image appears on the product Screen image looks abnormalAudio function does not work Have a problem with touch response English 42WT30MS SpecificationsApplicable only for models that support the speakers 47WT30MS Mm x 647.8 mm x 100.7 mm / 20.5 kg 55WT30MS Mm x 743.4 mm x 100.4 mm / 28 kg Dimensions 100.7 100.4 DTV Mode RGB PC supported modeHDMI/ DVI/ Display PortPC supported mode Resolution Horizontal Vertical FrequencykHz FrequencyHzCode Hexa Function IR CodesRS-232C Configurations Connecting the CableControlling the Multiple Product Communication ParameterCommand Data Command Reference ListHexadecimal English Transmission Transmission / Receiving ProtocolAcknowledgement Input Select Command x b Power Command k aEnergy Saving Command j q To set the Energy Saving function Picture Mode Command d x To select the Picture ModeSharpness Command k k Brightness Command k h Tint Command k jColor Command k Position Command f q Size Command f s Position Command f rAuto Configuration Command j u Balance Command k t To adjust the sound balanceSpeaker Command d Bass Command k s Volume Control Command k fVolume Mute Command k e To control the Volume Mute on/offTo set the Off TimerRepeat Mode/ Time function Off TimerRepeat Mode/ Time Command f ePower On Delay Command f h On Timer Input Command f u Sleep Time Command f fAutomatic Standby Command m n ISM mode Command j p Language Command f i To set the language for OSDFail Over Select Command m i To set the Fail Over function Reset Command f k Tile ID Command dTile Mode Command d d Natural Mode In Tile Mode Command d j Tile H Size Command d gDPM Select Command f j Tile V Size Command d h To adjust the Tile Vertical sizeTemperature Value Command d n OSD Select Command k l FAN Fault Check Command d w Key Command m cElapsed time return Command d l Remote Controller Lock/ Key LockBacklight Command m g To adjust the screen backlight Serial No.Check Command f y To check the Serial NumbersPC Power Command d s Control the PC power PC Power Control Command d tEnglish Model
Top Page Image Contents