92CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
55.Serial No.Check (Command: f y) To check the Serial Numbers.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Check the product Serial Number Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is ASCII code.
56.S/W Version (Command: f z) To check the Software Version.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Check the Software version Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
57.White Balance Red Gain (Command: j m) To set the White Balance Red Gain.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Red Gain 0 to 254
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
58.White Balance Green Gain (Command: j n) To set the White Balance Green Gain.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Green Gain 0 to 254 Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
59.White Balance Blue Gain (Command: j o) To set the White Balance Blue Gain.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Blue Gain 0 to 254 Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
60.Backlight (Command: m g) To adjust the screen backlight.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Backlight 0 to 100
Acknowledgement
[g][][set ID][][OK/NG][Data][x]
** It may not be supported depending on the model.