Extron electronic RCP 2000 user manual Setting the Display Mode, Mode menu options, Default cycle

Page 15

Operation, cont’d

3. Press Cut two times, until the switcher IP address is displayed in the LCD window. The Color/Tint button flashes.

4. Set the switcher’s IP address to 000.000.000.000 as follows:

a. Press one of the picture control buttons to access the desired octet of the switcher’s IP address.

Power

on

RCP for ISS 506

3 sec.

ISS 506

Default Cycle

Wipe #03

 

Pip #03

0.5 Sec

 

0.5 Sec

RCP 2000

b. When the desired octet is blinking in the LCD window, rotate the H knob all the way to the left to set the address block to 000.

Rotate to set

H blinking octet to 000.

S 000.000

Linked

Title

 

Dissolve

Lvl 150

 

0.5 Sec

Ver N.NN

c. Repeat steps a and b as needed for each address block that needs to be set to 000.

I 000.000

Default cycle

When you press the Wipe or Dissolve button to select a mode,

5. If you need to change the switcher’s

 

Sw Baud

baud rate, press Cut repeatedly until the

9600

Sw Baud screen appears, then rotate the

 

H knob to set the switcher’s baud rate.

 

6. When finished, press the Detail button to save your settings and exit the setup menu.

Setting the Display Mode

The RCP 2000 with ISS 506 support can operate in the four display modes. The wipe, PIP, and title modes are accessed by selecting them from the modes menu. Dissolve mode is accessed by pressing the Dissolve button.

the RCP exits the default cycle and either begins cycling through the Mode menu (Wipe button) or enters Dissolve mode (Dissolve button).

Mode menu options

To display the Mode menu, press and hold the Wipe while the default cycle is running.

Default

Cycle

Default cycle

After power-up and while the RCP 2000 is idle, the LCD screen displays the default cycle of screens, showing

•

The status of the link with the ISS 506.

•

The current display mode with its sub-effect number (if

 

applicable) and duration

Press and hold

WIPE

Wipe #03

0.5 Sec

Hold

Press

Hold

Press

Hold

Press

WIPE

DISSOLVE

WIPE

DISSOLVE

WIPE

DISSOLVE

 

Pip #03

 

 

Title

 

 

0.5 Sec

 

 

Lvl 150

 

•

The product name, RCP 2000, and the current firmware

 

version number (3.nn)

See the diagram on the next page.

Mode menu

The following modes can be selected from the Mode menu.

Wipe mode

In wipe mode, you can select from 24 transition sub-effects (including standard, curtain, square, and plus wipes) to use when the display is changing between the preview image and the program image.

3-8

RCP 2000 with ISS 506 Support • Operation

RCP 2000 with ISS 506 Support • Operation

3-9

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Extron USA East Remote Control PanelExtron’s Warranty PrecautionsFCC Class a Notice 安全须知 中文Quick Start Guide ­- RCP 2000 with ISS Support Set the RCP 2000 on a table, podium, or other flat surfaceQS-1 Table of Contents Table of Contents, cont’d IntroductionRCP 2000 with ISS 506 Support About this Manual Application DiagramFeatures IntroductionIntroduction, cont’d InstallationMaking an RCP Communication Cable InstallationInstallation Overview Back Panel Features and ConnectionsInstallation, cont’d When connecting the RCPEthernet link Operation RCP 2000 with ISS 506 Support Operation OperationTop Panel Controls RCP 2000 with ISS 506 support top panelOperation, cont’d Setting Up IP CommunicationAdjusting the IP settings Setting Up RS-232 CommunicationEntering IP setup mode Rotate the H Adjust knob to change the selected valueDefault cycle Setting the Display ModeMode menu options Default cycleDissolve mode PIP picture-in-picture modeTitle mode Standard wipes Using a CutTransition Sub-effects Sub-effects available in wipe and PIP modesSetting a transition sub-effect Using the Picture Controls Ethernet Control ResettingEstablishing a Connection Using the Configuration ScreensSystem Settings screen Ethernet ControlEthernet Control, cont’d RCP 2000 System Settings screenEntering IP and date/time settings Configuring the ISS 506 switcherUploading files Firmware Upgrade screenManaging Files Updating the firmwareAdding a directory Other file management activitiesFile Management screen AAppendix a Specifications and Part NumbersPart Numbers Specifications and Part NumbersSpecifications RCP 2000 with ISS 506 Support Control/Remote Control PanelSpecifications and Part Numbers, cont’d
Related manuals
Manual 23 pages 17.17 Kb

RCP 2000 specifications

The Extron RCP 2000 is a prominent tool in the realm of control systems, designed to enhance user experience in various environments, including educational institutions, corporate settings, and large venues. This remote control panel is engineered for streamlined operation of audio-visual equipment, serving as an indispensable component in managing multimedia presentations.

One of the main features of the RCP 2000 is its intuitive interface. Equipped with a backlit, tactile keypad, users can easily find and operate functions even in low-light settings. The ergonomic layout provides quick access to essential controls, such as volume adjustments, source selection, and macro commands, ensuring a user-friendly experience. The inclusion of customizable buttons allows for flexibility, enabling users to tailor the panel to their specific needs.

Another notable characteristic is its support for a wide range of audiovisual technologies. The RCP 2000 is compatible with Extron's extensive line of products and integrates seamlessly with other equipment, facilitating a cohesive system. This compatibility is further enriched by the device’s ability to support IP-based control, allowing for remote monitoring and programming, which is crucial for managing complex AV systems across multiple locations.

The RCP 2000 also features robust connectivity options, including Ethernet for network integration and RS-232 ports for direct control of hardware devices. This versatility enhances its functionality and ensures compatibility with many modern AV systems. Additionally, the panel supports multiple control protocols, making it adaptable to varied environments and distinct user preferences.

In terms of build quality, the Extron RCP 2000 maintains a high standard. It is constructed from durable materials, designed to withstand daily usage while maintaining its aesthetic appeal. Its compact design allows for easy installation, whether mounted on walls or placed on tables, making it a practical option for space-constrained areas.

In summary, the Extron RCP 2000 stands out with its user-friendly interface, extensive compatibility with audiovisual technologies, and robust construction. These features make it an ideal choice for efficient AV management, ensuring that users can focus on delivering impactful presentations without the hassle of complex control systems.
Top Page Image Contents