Magnavox ZC357MGX HDMI, then press, When you finish with the setting, press Setup to exit

Page 91

SETUPS

HDMI

Introduction

1Press [SETUP] in stop mode and use [K / L] to select “General Setting”, then press [OK].

2

Use [K / L] to select

Playback

“HDMI”, then press

Display

Video

[OK].

Recording

Clock

 

Channel

 

HDMI

 

 

Reset All

 

• You cannot select HDMI when an HDMI cable is not connected and the items are shown in grey color.

3Use [K / L] to select a desired item, then press [OK].

1 Format

2HDMI Audio

3 RGB Range

4 HDMI Control

4When you finish with the setting, press [SETUP] to exit.

1 Format (Default : RGB)

You can select the color space for HDMI output.

Set the appropriate color space for your display device.

Use [K / L] to select a setting, then press [OK].

When the connected device is not compatible with the Y/Cb/Cr, HDMI signal is output as RGB regardless of the setting.

Format

RGB

YCbCr

Your setting will be activated.

2 HDMI Audio (Default : ON)

If you do not want to output the audio through HDMI (when you digitally output the audio through the COAXIAL DIGITAL AUDIO OUT jack to your audio system, etc.), you can set the HDMI audio output off.

Use [K / L] to select a setting, then press [OK].

• Set to “OFF” when the HDMI sound is not output.

HDMI Audio

ON

OFF

Your setting will be activated.

3 RGB Range (Default : Normal)

You can adjust the RGB range to make the dark areas of the HDMI images brighter.

Use [K / L] to select a setting, then press [OK].

Select “Enhanced“ if the black-white contrast is not clear.

This setting is effective only for HDMI RGB output.

RGB Range

Normal

Enhanced

Your setting will be activated.

4 HDMI Control (Default : OFF)

HDMI Control

ON

OFF

HDMI control allows integrated system control over HDMI and is part of the HDMI standard.

When “HDMI Control” setting is set to “ON”, functions listed below will be available.

One Touch Play

When this unit is turned on, the TV also is turned on and the appropriate external input channel will be selected automatically. The appropriate external input channel can also be selected on your TV automatically, when you press [PLAY B], [G], [H,], [DISC MENU], [TIMER], [DTV/TV], [SETUP], [CHANNEL / ], or [the Number buttons] when the unit’s power is on.

Standby

When you press and hold [STANDBY-ONQ] for 2 seconds, it turns off the power to the standby mode of the TV first and then turns the power of this unit also.

System Information

Get & Set Menu Language

This unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit.

EN 89

Connections Basic Setup Recording Playback Editing Function Setup Others

Español

Image 91
Contents ZC357MGX Your TV Press REC Mode repeatedly to select a recording modeUse K/L to select the type Press REC to start recording Press Stop C to stop recordingHdmi cable not included Basic Supports only 480i resolution Video cableAudio Audio cable Video cable Audio cableDo not Open Safety InformationLocation and Handling Safety InformationAvoid a place with drastic temperature changes To Avoid the Hazards of Electrical Shock and FireIR signal check Supplied AccessoriesCleaning discs Cleaning the disc lens Disc handlingDolby Digital Recording Trademark InformationContents Contents Features Symbol Description FeaturesDescription refers to DVD+RW Description refers to DVD-RW Front Panel Functional OverviewRear Panel Functional OverviewOpen the cover Insert batteries Remote ControlInstalling the Batteries in the Remote Control Using a Remote ControlREC Mode button Confirm button Analog modeDigital mode Setup buttonHigher Quality Standard ConnectionAntenna Connection Required OverviewConnection to a TV with an Hdmi Compatible Port ConnectionConnecting to a TV Using the S-Video Out Jack Connecting to a TV Using Component Video Out JacksConnecting to a TV Using Audio / Video Jacks With this setup Connecting to a Cable / Satellite BoxSet channel 3 or Connecting to a TV without Audio / Video JacksDigital Output Digital Audio ConnectionActual Output Audio format discTurn on your TV Setting onBefore YOU Start Finding the Viewing Channel on Your TVGuide to On-Screen Display / Menu Before YOU StartHdmi Information First, track name will be displayed MP3 Tag InformationMain Menu Cable Analog / Digital Initial SettingAntenna Cable AnalogAuto Channel Scan Channel SettingUse K / L to select Channel, then press OK Channel SettingUse K / L to select Manual Channel Preset, then press OK Adding / Deleting ChannelsUse K / L to select Add or Delete, then press OK Press Setup to exitSelect the channel number to add or delete Select the channel number to deleteStandby mode Setting the ClockAuto Clock Setting Press Setup and turn the unit toDaylight Saving Time Setting the ClockManual Clock Setting Use K / L to select Clock Setting, then press OKSwitching Analog Mode Digital Mode Tuner SettingsChannel Selection Selecting TV Audio Tuner SettingsPress Audio to cycle through available audio languages Broadcast Disc Audio Selecting TV Audio cont’dAudio Recording Output Stereo DTV Closed Caption Use K / L to select Caption Service, then press OKSelect if you do not want DTV CC. This is the default Service 1 to ServiceClosed Caption Style Use K / L to select User Setting, then press OKUse K / L to select ON, then press OK Font Style Font SizeEdge Type Edge ColorUnrecordable Discs Recording ModeInformation on DVD Recording Recordable DiscsRecording the DTV Closed Caption Setting for Auto ChapterBefore Recording Make Recording CompatibleIt may take a while to load Disc completely Label facing upPress OPEN/CLOSE a to close the disc tray Desired channel to recordPress REC repeatedly until the desired length appear Press Stop C to exit the title listPress Timer Use K / L to select New Program, then press OK Timer RecordingUse K / L to enter the date, then press B Use K / L to select a recording mode Timer RecordingHow to select a channel number for the timer recording To stop the timer recording in progressPress STANDBAY-ON y Press Timer Check the information Priority of Overlapped Settings Hints for Timer RecordingOverwriting in the Middle of the Title Overwriting Unnecessary TitleOverwriting from the Beginning TitleOverwrite recording a Existing title B Existing title C Overwriting Unnecessary TitleHints for Overwriting Overwrite recording a Existing title B After overwritingUse K / L to select Video, then Settings for AN External DevicePress Setup to exit Connection to an External DeviceTo record from Press Cstop on the unit to stop Recording Settings for AN External DeviceRecording from an External Device RecordingSetting a Disc to Protect Disc Edit menu will appear Press Setup Use K / L to select Disc Edit, then press OKFinalizing a Disc Finalizing is completedAuto Finalizing Playing the Discs on Other DVD PlayersColor Systems Information on PlaybackPlayable Discs and Files Unplayable DiscsHint for DVD Playback Disc Playback Mode menu will appearInformation on Playback PBC playback control for Video CDPress Play B to start playback Basic PlaybackDirect Playback Press STANDBY-ON yUse K / L to select a desired title Basic PlaybackPlayback from the Title List Then press OKRefer to Resume Playback on Use K / L to select Play, thenPress OK Playback will startUpper limit MP3Sampling frequency Constant bit rateDuring playback, press Pause F Using the Title / Disc MenuPause Press Stop C to stop playbackRapid Playback Special PlaybackResume Playback Fast Forward / Fast Reverse PlaybackZoom Special PlaybackStep by Step Playback Slow Forward / Slow Reverse PlaybackRepeat Playback Marker SettingSlide Show Random PlaybackProgram Playback Title / Chapter Search Using H / GUsing Display SearchTo move to the number next to , press B SearchTime Search Audio CDSwitching Audio Soundtrack Switching SubtitlesFor DVD-video Audio soundtrack will switch Reducing Block Noise Switching Virtual Surround SystemSwitching Camera Angles Selecting the Format of Audio and VideoPress Title Information on Disc EditingGuide to a Title List Editing DiscsUse K / L to select Edit, then Editing DiscsDeleting a Title Press TitleGuide to Edit Title Name Editing DiscsPutting Names on Titles After this operation is completed, press Return to exitSubmenu will appear Setting Chapter MarksUse K / L to select Add, then press OK Press Return twice to exitClearing Chapter Marks To delete all chapter marks Clearing Chapter Marks cont’dAll chapter marks will be deleted Chapter is now hidden Hiding ChaptersPress Return to exit Setting Pictures for ThumbnailsPicture for thumbnail will be set Use H, G, E, D, Pause Dividing a TitleFollow steps 1 to 3 in Deleting a MenuWindow for entering a title name will appear When you finish entering a title name, pressPutting Name on Disc Name, then press OK. e.g. DVD+RWErasing Disc Contents of the disc is now deletedMaking Edits Compatible Contents List of SettingsItems highlight is the default List of SettingsSAP Use K / L to select a desired item, then press OK SetupsPlayback Use K / L to select Playback, then press OKYes SetupsParental Lock Default OFF Playback cont’dAngle Icon Default on Disc Menu Language Default EnglishAudio Language Default Original Subtitle Language Default OFFRefer to DisplayUse K / L to select a desired item On pages 85-87Mpaa Rating Use the Number buttons to enter the access passwordDisplay cont’d ChipCanadian French Rating Use the Number Buttons to enter new access passwordTo set the rating Selected item Progressive Scan Default OFFTV Aspect Default 43 Letter Box VideoHDMI, then press When you finish with the setting, press Setup to exitYour setting in recording will be initialized Reset AllSelect Yes again using K / L , then press OK Reset the setting to defaultTroubleshooting Troubleshooting Unit does not operate A case you intend to cancelOPEN/CLOSE a to take out the disc. The disc canceled during Repairing process MAY not work94 EN Language Code Language CodeGlossary Tuner SpecificationsGeneral RecordingDisco no Grabable EspañolDiscos Reproducibles Disco GrabableModo Hdmi y señales efectivas de salida EspañolConexión Básica Conexión a un Televisor con un Puerto Compatible con HdmiPresione REC para iniciar la grabación Presione STANDBY-ON yNuevo OPEN/CLOSE a para cerrar la bandeja de discos Para seleccionar un modo deNuevo, y luego presione OK Presione TimerConfigure una programación del Configurar una programación delTel Customer Service1VMN26797