Magnavox ZC357MGX owner manual Timer Recording, Use K / L to select a recording mode

TIMER RECORDING

4Use [K / L / s / B] or [the Number buttons] to enter the start and end time, then press [B].

Date	Start			End
JAN/02	12	: 00AM		- - : - -
CH	Mode
DTV69. 1		SP
			SP	2h00m

•You cannot make a program which recording time exceeds 12 hours.

5Use [K / L / s / B] to select analog (“- - -”) / digital (“DTV”) mode or external input (L1 / L2), then press

[B].

e.g.) external input mode

	Date	Start		End
JAN/02		12 : 00AM	1 : 00AM
	CH	Mode
L1		SP	SP	1h00m

To record from external input (e.g., cable/ satellite box), select L1 or L2.

Use [K / L] or [the Number buttons] to select the channel number to record, then press [B].

For digital mode, select both major and minor channels. Refer to “How to select a channel number for the timer recording” on page 43 for more details.

e.g.) analog mode

Date		Start		End
JAN/02		12 : 00AM	1 : 00AM
	CH	Mode
	10	SP	SP	1h00m

6Use [K / L] to select a recording mode.

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
CH	Mode
DTV69. 1	SP	SP	1h00m

Refer to “Recording Mode” on page 37.

•You can check the remaining recordable space of the disc when you select the recording mode.

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
CH	Mode
DTV69. 1	SP	SP	1h00m

Auto recording mode select...

When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and selects the best recording mode available automatically to complete recording the program.

Date	Start	End
JAN/02	12 : 00AM	1 : 00AM
CH	Mode
DTV69. 1	Auto	Auto	1h00m

•“Auto” is only available for one program in the timer program list.

•The recording may be cut short when the available recording space of the disc is too limited.

7 Press [OK] when all items are entered. After displaying an instructive message for 10 seconds, timer program list will appear.

Press STANDBY-ON to Timer Standby mode.

e.g.) digital mode

Date			Start		End
JAN/02			12 : 00AM	1 : 00AM
CH			Mode
DTV	69	. 1	SP	SP	1h00m

Timer Programming

JAN/ 2/09 12:00 AM 69.1 SP
SP (1:00)		THU JAN/01 11:00AM
Date	Start	End	CH
JAN/02	12:00AM	1:00AM	DTV69. 1

Your program setting is now stored.

•To set another program, repeat steps 2 to 7.

•To exit, press [TIMER] or [SETUP].

•When 2 or more programs are overlapped, “Timer program overlapped” appears, and the overlapped program will be displayed in blue.

•To correct the timer program refer to “Checking, canceling, or correcting the timer programming information” on page 43.

8Press [STANDBY-ONy] to set a timerTIMER REC indicator will light up on the frontprogramming.

panel.

42 EN