Magnavox ZC357MGX owner manual Hints for Timer Recording, Priority of Overlapped Settings

Page 46

TIMER RECORDING

Hints for Timer Recording

•If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost.

•If a disc is not inserted, TIMER REC indicator flashes and timer recording cannot be performed. In some cases, TIMER REC indicator will light up momentarily around the start point as the unit attempts to record. Please insert a recordable disc.

•When all the timer recording is completed, TIMER REC indicator flashes. To play back or eject the recorded disc, press [STANDBY-ONy] first, then select the recorded title and press [PLAY B], or [OPEN/CLOSE A] to remove the disc.

•During timer recording or timer standby mode (TIMER REC indicator will light up), any operations on the unit will not be available. To make these operations available, press [STOP C] to cancel the timer recording or [STANDBY-ONy] to release timer standby mode (TIMER REC indicator will light off).

•When the starting and the ending time are the same, “Exceeds 12 hours” appears and the program setting will not be accepted.

•When the programmed starting and ending time are earlier than the current time, the setting will not be accepted.

•If the starting time is earlier and the ending time is later than the current time, the recording will start right after you press [STANDBY-ONy] at step 8 on page 42.

•You cannot change the audio language for the timer recording of digital TV broadcasting.

The Priority of Overlapped Settings

•Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over the programs with the later start time when timer programs overlap.

•When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.

•When 2 or more timer programs have the same start time, the program set first will be given priority.

•A timer recording of lower priority will be canceled or start from the middle.

•Check the overlapped timer programmings and change the priority if necessary.

When the starting time is the same:

A program set previously (PROG. A) has priority.

PROG. A

PROG. B

actual recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROG. A

 

 

PROG. B

 

 

 

 

The first 2 minutes (at the longest) will be cut off.

Note for DVD recording

•When the recording time of 2 programs are overlapped, or the end time of a program and the start time of another program is the same, the first 2 minutes (at the longest) of the subsequent program will be cut off.

•If the cut-off portion comes up to 3 minute or more, this program will be displayed with error number E40 in the timer programming list.

When the end time of the programming currently being recorded and the start time of the subsequent program are same:

The beginning of the PROG. B may be cut off.

PROG. A

 

 

PROG. B

 

 

actual

PROG. A

PROG. B

recording

 

 

The first 2 minutes (at the longest) will be cut off.

44 EN

Page 45 Page 47
Image 46
Page 45 Page 47
Contents ZC357MGX Press REC to start recording Press Stop C to stop recording Press REC Mode repeatedly to select a recording modeUse K/L to select the type Your TVVideo cable Audio cable Basic Supports only 480i resolution Video cableAudio Audio cable Hdmi cable not includedSafety Information Do not OpenTo Avoid the Hazards of Electrical Shock and Fire Safety InformationAvoid a place with drastic temperature changes Location and HandlingCleaning the disc lens Disc handling Supplied AccessoriesCleaning discs IR signal checkTrademark Information Dolby Digital RecordingContents Contents Features Symbol Description FeaturesDescription refers to DVD+RW Description refers to DVD-RW Functional Overview Front PanelFunctional Overview Rear PanelUsing a Remote Control Remote ControlInstalling the Batteries in the Remote Control Open the cover Insert batteriesSetup button Confirm button Analog modeDigital mode REC Mode buttonOverview ConnectionAntenna Connection Required Higher Quality StandardConnection Connection to a TV with an Hdmi Compatible PortConnecting to a TV Using Component Video Out Jacks Connecting to a TV Using the S-Video Out JackConnecting to a TV Using Audio / Video Jacks Connecting to a Cable / Satellite Box With this setupConnecting to a TV without Audio / Video Jacks Set channel 3 orAudio format disc Digital Audio ConnectionActual Output Digital OutputFinding the Viewing Channel on Your TV Setting onBefore YOU Start Turn on your TVGuide to On-Screen Display / Menu Before YOU StartHdmi Information MP3 Tag Information First, track name will be displayedMain Menu Cable Analog Initial SettingAntenna Cable Analog / DigitalChannel Setting Auto Channel ScanAdding / Deleting Channels Channel SettingUse K / L to select Manual Channel Preset, then press OK Use K / L to select Channel, then press OKSelect the channel number to delete Press Setup to exitSelect the channel number to add or delete Use K / L to select Add or Delete, then press OKPress Setup and turn the unit to Setting the ClockAuto Clock Setting Standby modeUse K / L to select Clock Setting, then press OK Setting the ClockManual Clock Setting Daylight Saving TimeSwitching Analog Mode Digital Mode Tuner SettingsChannel Selection Selecting TV Audio Tuner SettingsPress Audio to cycle through available audio languages Broadcast Disc Audio Selecting TV Audio cont’dAudio Recording Output Stereo Service 1 to Service Use K / L to select Caption Service, then press OKSelect if you do not want DTV CC. This is the default DTV Closed CaptionClosed Caption Style Use K / L to select User Setting, then press OKUse K / L to select ON, then press OK Edge Color Font SizeEdge Type Font StyleRecordable Discs Recording ModeInformation on DVD Recording Unrecordable DiscsMake Recording Compatible Setting for Auto ChapterBefore Recording Recording the DTV Closed CaptionDesired channel to record Label facing upPress OPEN/CLOSE a to close the disc tray It may take a while to load Disc completelyPress Stop C to exit the title list Press REC repeatedly until the desired length appearPress Timer Use K / L to select New Program, then press OK Timer RecordingUse K / L to enter the date, then press B Timer Recording Use K / L to select a recording modeHow to select a channel number for the timer recording To stop the timer recording in progressPress STANDBAY-ON y Press Timer Check the information Hints for Timer Recording Priority of Overlapped SettingsTitle Overwriting Unnecessary TitleOverwriting from the Beginning Overwriting in the Middle of the TitleOverwrite recording a Existing title B After overwriting Overwriting Unnecessary TitleHints for Overwriting Overwrite recording a Existing title B Existing title CConnection to an External Device Settings for AN External DevicePress Setup to exit Use K / L to select Video, thenRecording Settings for AN External DeviceRecording from an External Device To record from Press Cstop on the unit to stop RecordingSetting a Disc to Protect Finalizing is completed Press Setup Use K / L to select Disc Edit, then press OKFinalizing a Disc Disc Edit menu will appearPlaying the Discs on Other DVD Players Auto FinalizingUnplayable Discs Information on PlaybackPlayable Discs and Files Color SystemsPBC playback control for Video CD Disc Playback Mode menu will appearInformation on Playback Hint for DVD PlaybackPress STANDBY-ON y Basic PlaybackDirect Playback Press Play B to start playbackThen press OK Basic PlaybackPlayback from the Title List Use K / L to select a desired titlePlayback will start Use K / L to select Play, thenPress OK Refer to Resume Playback onConstant bit rate MP3Sampling frequency Upper limitPress Stop C to stop playback Using the Title / Disc MenuPause During playback, press Pause FFast Forward / Fast Reverse Playback Special PlaybackResume Playback Rapid PlaybackSlow Forward / Slow Reverse Playback Special PlaybackStep by Step Playback ZoomMarker Setting Repeat PlaybackSlide Show Random PlaybackProgram Playback Search Using H / GUsing Display Title / Chapter SearchAudio CD SearchTime Search To move to the number next to , press BSwitching Audio Soundtrack Switching SubtitlesFor DVD-video Audio soundtrack will switch Selecting the Format of Audio and Video Switching Virtual Surround SystemSwitching Camera Angles Reducing Block NoiseEditing Discs Information on Disc EditingGuide to a Title List Press TitlePress Title Editing DiscsDeleting a Title Use K / L to select Edit, thenAfter this operation is completed, press Return to exit Editing DiscsPutting Names on Titles Guide to Edit Title NamePress Return twice to exit Setting Chapter MarksUse K / L to select Add, then press OK Submenu will appearClearing Chapter Marks To delete all chapter marks Clearing Chapter Marks cont’dAll chapter marks will be deleted Hiding Chapters Chapter is now hiddenPress Return to exit Setting Pictures for ThumbnailsPicture for thumbnail will be set Menu Dividing a TitleFollow steps 1 to 3 in Deleting a Use H, G, E, D, PauseName, then press OK. e.g. DVD+RW When you finish entering a title name, pressPutting Name on Disc Window for entering a title name will appearContents of the disc is now deleted Erasing DiscMaking Edits Compatible List of Settings ContentsList of Settings Items highlight is the defaultSAP Use K / L to select Playback, then press OK SetupsPlayback Use K / L to select a desired item, then press OKPlayback cont’d SetupsParental Lock Default OFF YesSubtitle Language Default OFF Disc Menu Language Default EnglishAudio Language Default Original Angle Icon Default onOn pages 85-87 DisplayUse K / L to select a desired item Refer toChip Use the Number buttons to enter the access passwordDisplay cont’d Mpaa RatingCanadian French Rating Use the Number Buttons to enter new access passwordTo set the rating Video Progressive Scan Default OFFTV Aspect Default 43 Letter Box Selected itemWhen you finish with the setting, press Setup to exit HDMI, then pressReset the setting to default Reset AllSelect Yes again using K / L , then press OK Your setting in recording will be initializedTroubleshooting Troubleshooting Repairing process MAY not work A case you intend to cancelOPEN/CLOSE a to take out the disc. The disc canceled during Unit does not operate94 EN Language Code Language CodeGlossary Recording SpecificationsGeneral TunerDisco Grabable EspañolDiscos Reproducibles Disco no GrabableConexión a un Televisor con un Puerto Compatible con Hdmi EspañolConexión Básica Modo Hdmi y señales efectivas de salidaPara seleccionar un modo de Presione STANDBY-ON yNuevo OPEN/CLOSE a para cerrar la bandeja de discos Presione REC para iniciar la grabaciónConfigurar una programación del Presione TimerConfigure una programación del Nuevo, y luego presione OKTel Customer Service1VMN26797
Top Page Image Contents