MDV455_17x 11/11/03 4:34 PM Page 14
14 Hookups (cont’d)
Connecting to a TV and a Receiver
with and without Dolby Pro Logic decoding
Stereo
(example only)
RIGHT AUDIO IN
LEFT AUDIO IN
Back of TV
(example only)
1
VIDEO IN
2
3
1 | Connect the supplied video cable to the yellow Video jack of the |
DVD Player and to the TV’s Video In jack. The supplied video cable | |
| has yellow markings. |
2 | Connect the supplied audio cable to the white and red Audio L/R |
(left and right) jacks on the DVD Player and to the left/right Audio |
In jacks on the Stereo. Match the cable colors to the jack colors.
Plug the power cords of the DVD Player, Stereo, and the TV into an
3 active power outlet. Press
Turn on the Stereo and set it to the correct Audio In channel or
4 sound source. Refer to the Stereo owner’s manual for details.
Turn on the TV. Set it to the correct Video In channel. See your TV
5 owner’s manual for details. Or, go to your lowest TV channel (01 or 02) and change channels downward until you see the DVD screen saver on the TV.
Helpful Hints
• If you prefer or need to use the
• Adjust Downmix and Dual Mono accordingly. Details are on page 36.