SETUP
Connections
Connection to a TV
| Method 1 |
| Method 2 |
|
|
|
|
analog audio standard picture | good picture | ||
TV
Method 3*1 |
| Method 4*2 |
|
|
|
better picture | best audio / |
| picture |
AUDIO IN
L
R
RCA audio cable
VIDEO IN
|
| |
and | or | or |
RCA video |
| |
cable |
| cable |
COMPONENT | COMPONENT |
|
VIDEO IN | VIDEO IN |
|
Y | Y | HDMI IN |
CB or | PB | or |
CR | PR |
|
RCA component |
| HDMI |
video cable |
| cable |
SETUP
This unit
VIDEO | |
OUT | OUT |
| AUDIO OUT | VIDEO OUT | COMPONENT | HDMI OUT | |
| VIDEO OUT | ||||
|
|
|
|
| |
*1 | This unit is compatible with the progressive scan system. The feature provides you with the higher quality pictures than traditional | ||||
| output system does. To utilize this feature, a component connection is required. Refer to “HDMI Video Resolution” or “ Progressive ” | ||||
| setting on page 18 to set the video resolution. |
|
|
| |
*2 | Analog audio connection is not required for this connection. |
|
| ||
Supplied cables used in this connection are as follows:
•RCA audio cable (L/R) x 1
•RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note:
•Connect this unit directly to your TV. If RCA audio / video cables are connected to a VCR, pictures may be distorted due to the copy protection system.
•Changing “ Progressive ” setting is not available while HDMI cable is connected.
If your TV is compatible with 525 (480) progressive scanning and you want to enjoy that high quality picture;
You must select the connection COMPONENT VIDEO OUT above and progressive scanning mode. To set the mode, set “Progressive” to “On” in “Video” menu. Refer to pages
• When “Progressive” is “On”, video signals from the unit’s VIDEO OUT and
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “Progressive” to “Off” in “Video” menu or by pressing and holding [PLAY B] on the front of the unit for more than 5 seconds.
After connecting to your TV:
You will need to switch to video input on your TV. This is usually marked TV / VIDEO, INPUT or AUX.
Please refer to your TV’s owner’s manual for details.
Input modes for common TV brands:
Listed below are inputs for common brand name TV’s.
Admiral: | AUX | Panasonic: | TV / VIDEO |
Curtis Mathis: | LINE1, LINE2, 00, 90, 91, 92, 93 | RCA: | INPUT, TV / VCR, 00, 90, 91, 92, 93 |
GE: | INPUT, TV / VCR, 00, 90, 91, 92, 93 | Samsung: | TV / VIDEO |
Hitachi: | INPUT, AUX | Sanyo: | VIDEO |
JVC: | VIDEO, VIDEO1, VIDEO2, VIDEO3 | Sharp: | 00 |
Kenwood: | AUX | Sony: | VIDEO1, VIDEO2, VIDEO3 |
00 | Toshiba: | TV / GAME | |
Magnavox: | AUX CHANNEL | Zenith: | 00 |
|
|
|
|
EN | – 6 – |