SETUP
Connection to an Audio System
Analog Audio Connection
stereo system
Audio | analog audio | |
| ||
| input jacks | |
| L | R |
RCA audio cable
This unit
L
AUDIO OUT
R
AUDIO
OUT
Supplied cables used in this connection are as
follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Rear Terminals
Digital Audio Connection
Dolby Digital decoder,
MD deck or DAT deck
COAXIAL
digital audio input jack
digital audio coaxial cable
DIGITAL
AUDIO OUT
| Setup > Audio> |
Connection | Setting |
Digital Out |
Connecting to a Dolby Digital decoder | Bitstream | |
for Dolby Digital audio output. | ||
| ||
|
| |
Connecting to the other device | LPCM | |
(an MD deck or DAT deck etc.) | ||
without Dolby Digital decoder. |
|
* To complete these settings, refer to pages 15,17.
Note:
•The audio source on a disc in a Dolby Digital
•By hooking this unit up to a Dolby Digital decoder, you can enjoy
•Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
•“Digital Out” setting is not available while HDMI audio is output.
1 | 2 | 3 | 4 | 5 |
|
|
| 6 |
|
1HDMI OUT jack
Use to connect a TV with an HDMI compatible port with an HDMI cable.
2DIGITAL AUDIO OUT COAXIAL jack
Connect a digital audio coaxial cable here through the digital audio coaxial input jack of a decoder or audio receiver.
3AUDIO OUT jacks
Connect an audio cable here through the audio input jacks of a television or other audio device.
4COMPONENT VIDEO OUT jacks
Connect a component video cable here through the component video input jacks of a television.
5
Connect an
6VIDEO OUT jack
Connect a video cable here through the video input jack of a television.
EN | – 8 – |