HDMI Audio
Media |
| Audio Recording Format | HDMI Audio Setting |
| |
| Bistream |
| LPCM | ||
|
|
|
| ||
|
|
|
|
|
|
| Dolby Digital | Dolby Digital |
| Multi PCM | |
|
|
|
|
| |
| LPCM | Multi PCM |
| Multi PCM | |
|
|
| |||
|
|
|
|
|
|
| audio CD | 2ch PCM |
| 2ch PCM | |
|
|
|
|
| |
| MP3 | 2ch PCM |
| 2ch PCM | |
|
|
|
|
|
|
HDMI Mode and Actual Output Signals
Press [HDMI] to change the resolution of the video signal being output from the HDMI OUT. The video resolution changes as follows every time [HDMI] is pressed. Or change the setting in the “Resolution” in the settings menu.
480p | 480p | 720p | 480p | 1080i | 480p | 1080p |
e.g.) when 480p is selected as an default.
Copyright protection system
To play back the digital video images of
player and the display device (or an AV receiver / amplifier) support a copyright protection system called HDCP (highbandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption
and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device (or AV receiver / amplifier) for more information.
Note:
•When using
•The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length) may be limited by the device that is connected.
•Among the display device(s) that support HDMI, some do not support audio output (for example, projectors). In connections with device such as this unit, audio signals are not output from the HDMI output jack.
•When this unit’s HDMI jack is connected to a
•Pressing [HDMI] does not work when HDMI cable is not connected, or when no video signal is being output from the HDMI OUT jack.
•Pressing [HDMI] does not work when a DVI compatible display devices is connected. Change the video resolution in the “Resolution” in the settings menu.
•When you make a selection, the TV monitor temporarily goes blank and then comes back again. If it does not, press [HDMI] repeatedly to change the resolution or press and hold [ PLAY B] on the front panel for 5 seconds to change the setting back to its default.
SETUP
– 7 – | EN |