ou can view the playback of VCR tapes (Video Disc
Players, camcorders, etc). by using the AUDIO and VIDEO INPUT jacks (on the rear of the
TV).
For example: to view the playback of a VCR tape:
<_ Connect the VIDEO and
<__ AUDIO IN(put) jacks on the TV to the AUDIO and VIDEO
OUT(put) jacks on the VCR. Press the MENU (M) button
on the remote, then press the
CHANNEL • or • buttons (or the MENU • or • buttons on
the TV) to select the word INPUT with the TV's
Note: You can press the
CHANNELA• buttons to select
"VCR/AUX" (if it has been added to the TV's channel memory.) See page l0 for details.
<_ Press the VOLUME (+) or (-)
VCR/AUX(iliary) INPUTS on
the rear of the TV. I utton to select the
Turn the VCR ON and PLAY
the VCR tape to be viewed on the TV.
ieltlclllbei, | whcii | ,you'ic |
ti through using the AJV INPUT jacks, return the INPUT display screen on the TV to
ANTENNA. If you leave the TV
in the VCR/AUX INPUT mode and there is no signal source connected to the jacks, you will be seeing only a blank screen on the TV.
NOTE: If you have a mono
(single audio OUTPUT) VCR,
"Y" Connectors are available
(from your dealer or Parts
Information Center 1 800 292- 6066) to connect to the audio inputs on the TV.
PICTURE AND SOUND FROM
PLAYBACK OF VCR TAPE
[ STfi I_..q0
VIDEO IN
(YELLOW)
VCR
(EQUIPPED WITH VIDEO AND AUDIO OUTPUT JACKS)
17