Magnavox TS 2775 owner manual Stations or Antenna signals

OeTE: If you went through tup (see page 7), this task

has already been completed for

you.

You need to make sure that the TV

is set to pick up either Cable TV

stations or Antenna signals. In

other words, the TV needs to know whether you have connected a Cable TV signal or a normal antenna to its ANTENNA plug.

Press MENU (M) button on

the remote, then press the CHANNEL • or • buttons (or the MENU • or • buttons on the

TV) to select the word CABLE with the TV's on-screen Arrow.

Press the VOLUME (+) or (-)buttons (on the TV or the remote) to select either:

YES- If you DO have Cable TV

connected to the "IV. Channels 1-125 can be selected.

NO- If you have an Antenna connected to the TV.

Channels 2-69can be selected.

<._ Press STATUS to clear the screen

Try it out. Press

CHANNEL •• buttons

and scan the channels. CH•• on

the remote works only after STATUS button is pressed (or Menu times out.)

Remember, the TV has been set at the factory to select certain channel numbers. See the following page on how to set the TV to select the channels in your area.

8