
ow that you have looked up the
Number for your brand of VCR (on previous page), you are ready to follow the four simple steps below.
Please read through steps 1.4
before beginning.
VCR
Press and release the
I STATUS button.
<_ Within thirty seconds after
releasing the REC button, press
and release the VCR System
button.
<_ Within thirty seconds after releasing the VCR System button, ENTER THE TWO DIGIT CODE NUMBER for the desired VCR. The remote is now ready to send commands to the VCR.
Point the remote at the VCR.
remote to turn the VCR ON.
I Press the POWER button on the
Try ztout. rl'het2hanncl a and VCR buttons on the
remote should now operate the VCR.
Remember, if this doesn't work
the first time, repeat steps using the same remote code number.
If after a second try the remote
does not operate your VCR, and there are more code numbers
listed for your brand VCR, use the next listed code number.
If after repeated attempts the code number method does not work
your VCR, try the "VCR SEARCH" method on page 26.
._ENu
(D
ENTERCLEAR
TV
M 0
23