Magnavox 22MV402X, 26MV402X, 32MV402X owner manual Avl

Sound

Before you begin:

You must set Home in Location. ➠ p. 29

Otherwise, personalized picture and sound settings will not be memorized after the unit goes into Standby mode.

1Press and use ▲▼◄► to select Setup, then press OK.

2 Use ▲▼ to select Sound, then press OK.

Picture	Auto sound	Personal
Sound	Equalizer	Start now
Features	Balance
Installation	Digital audio language	English
Software	SRS TruSurround XT	On
	AVL	Off

23

Digital TV operation

You can select the Audio language while your TV is receiving the Digital broadcasting.

Digital audio	to select the language according to your preference.
language	(It differs depending on the program.)

Analog/Cable TV operation

You can select Main or SAP while your TV is receiving the Analog broadcasting that has the SAP (Second Audio Program).

(It differs depending on the program.)

Alternate audio	Main	to output main-audio
	SAP	to output second-audio program

Analog/Cable TV operation

When you set to Main in Alternate audio above, you can select Mono or Stereo if the Analog broadcasting is sending the MTS (Multichannel television sound).

English

TV speakers On

Mono/Stereo

Mono to output mono-audio

Delta volume

3Use ▲▼◄► to select the item you want to adjust, then press OK.

The following sound settings can be configured. Depending on the format of the broadcasting, some sound settings are not available.

	to select the desired setting
	(Personal, Standard, Vivid, Sports, Movie, Music and
Auto sound	News)
	When you adjust the following settings (Equalizer,
	SRS TruSurround XT and AVL), Personal will be set
	automatically.

Adjust the tonal quality for each frequency.

	Cursor ◄	Cursor ►
Equalizer	to adjust the each level of tonal quality
	Press BACK to go back to the previous menu.

Adjust the speakers to suit your listening preference.

Balance	Cursor ◄	Cursor ►
	to adjust the balance of the right and left speakers

Stereo to output stereo-audio

This selects sound modes for more spatial or surround sound reproduction.

SRS TruSurround	Off	to set SRS TruSurround XT® to Off
XT	On	to set SRS TruSurround XT® to On

This function keeps a constant loudness differential between the TV commercials and the programs.

AVL	Off	to remove the auto volume leveling
	On	to reduce volume differences between the
		TV commercials and the programs

You can select the Audio Output from the unit’s speakers or not. If your amplifier is HDMI link function compatible and connected by an HDMI cable to this unit, some sound operations such as volume up can be changed by using this unit’s remote control. Make sure fun-Link control is set to On. ➠ p. 30

	Off	not to output sound from the unit’s
		speakers
TV speakers	On	to output sound from the unit’s speakers
	CEC Link	to control Audio Output from your
		connected fun-Link Compliant Devices
		with VOL + / − by using this unit's remote
		control.

If a channel or Input device is too loud or too soft, navigate to that channel or Input device.

	Cursor ◄	Cursor ►
Delta volume	to set a negative delta	to set a positive delta
	volume level as per your	volume level as per your
	personal preferences	personal preferences

Note

••Alternate audio and Mono/Stereo are not available when you watching TV programs with a cable box or satellite set-top box connected through an HDMI cable or Component / Composite Video cables.