Extron electronic DVI-RGB 100 manual Installation, Front Panel Controls and Indicator

Page 3

Installation

Many monitors will not support all of the resolutions and refresh rates shown. If you get no display, try a different rate.

6SOG (Sync on Green) On/Off switch— Set this switch to the On (up) position to enable SOG for RGsB video.

Set this switch to the Off (down) position to disable SOG for RGBS or RGBHV video.

7AC power connector — Plug a standard IEC power cord into this connector to connect the converter to a 100 to 240VAC, 50 Hz or 60 Hz power source.

Installation

1.

Power off the computer and its local monitor.

2.

For optional rack mounting, mount the converter on a 19" 1U

 

Universal Rack Shelf (Extron part #60-190-01) (figure 3).

False Front Panel uses 2 front holes

(2) 4-40 x 3/16" Screws

Use 2 Mounting Holes on

Opposite Corners

Figure 3 — Rack mounting the DVI-RGB 100

a.

Remove the rubber feet from the case if installed.

b.

Mount the converter on the rack shelf, using two 4-40 x 3/16

 

screws in opposite (diagonal) corners.

 

c.

Install a blank panel (included in the rack kit) or another 1U

 

 

half-rack unit on the unused side of the rack.

3.

Connect the input, loop-through and output cables. See Rear Panel

 

Connections and Controls.

 

 

The maximum permissible length of the DVI input and output

 

 

 

 

cables is 16.4 feet (5 meters). Ensure that the cables do not exceed

 

 

the maximum permissible length, otherwise images may be

 

 

distorted or missing. Extron does not guarantee signal integrity

 

 

beyond 16.4 feet.

4.

Configure the DDC, Output Resolution, and SOG switches. See

 

Rear Panel Connections and Controls.

5.

Connect power to the DVI-RGB 100.

6.

Power on the local monitor and other connected display device(s).

7.

Power on the computer

Front Panel Controls and Indicator

8 9 10

LEVEL PEAK

BOOST CONTROL

DVI-RGB 100

DVI TO RGB CONVERTER

Figure 4 — DVI-RGB 100 front panel

8Power LED — The Power LED lights when the DVI-RGB 100 is receiving power.

9Level Boost control — The Level Boost control alters the bright- ness of the picture on the RGB output. Judge the adjustment visually by looking at the display.

•At the minimum level setting (the counterclockwise limit of this control), the converter outputs video at 0.5 volts p-p.

•At the control’s midpoint, the converter outputs video at 0.7 volts p-p (unity level).

•At the maximum level setting (the clockwise limit of this control), the converter outputs video at 1.45 volts p-p.

Select a level setting of 0.7 volts and above to compensate for the signal level decrease that occurs with long cables. Set the level at the maximum setting for cable lengths over 500 feet.

Level Boost has no affect on the DVI output of the Buffered Loop- through connector.

4

DVI-RGB 100 • Installation

DVI-RGB 100 • Installation and Operation

5

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Direct Digital Video to RGB Video Converter DVI-RGBRear Panel Connections and Controls InstallationOverviewInstallation InstallationFront Panel Controls and Indicator Operation Indicators and SpecificationsDVI Connector Pin Assignments SpecificationsOptional Adapters and Cables SyncGeneral
Related manuals
Manual 1 pages 32.04 Kb

DVI-RGB 100 specifications

Extron Electronics is renowned for its cutting-edge solutions in audiovisual technology, and the DVI-RGB 100 stands out as a high-performance interface for video signal distribution. This device is particularly designed for converting DVI and RGB signals, making it an essential component in various multimedia systems, including those utilized in educational institutions, corporate environments, and professional AV setups.

One of the distinguishing features of the DVI-RGB 100 is its ability to provide seamless signal conversion between DVI and analog RGB, supporting resolutions up to 1920x1200 at 60 Hz. This ensures that users can enjoy high-definition video content without any degradation in image quality. The device supports a broad range of input formats, enhancing its versatility in various applications.

A key technological advancement embedded in the DVI-RGB 100 is its advanced signal processing capabilities. The device features Extron's proprietary technology to optimize video signals, ensuring minimal signal loss and maximum fidelity. Its built-in signal conditioning compensates for the effects of cable length, allowing for long-distance transmission without compromising quality.

The DVI-RGB 100 is engineered with simple plug-and-play functionality, allowing for quick installation and ease of use. Users can connect their devices without the need for complicated configurations, significantly reducing setup time and facilitating a user-friendly experience. Additionally, it includes an LED indicator that provides real-time feedback on signal status, ensuring users can quickly identify any issues.

Another important characteristic of the DVI-RGB 100 is that it offers extensive compatibility with a broad range of devices, including computers, projectors, and monitors. It is equipped with DVI and 15-pin VGA connectors, providing flexibility in adapting to different system requirements.

In terms of design, the DVI-RGB 100 is compact, allowing for easy integration into rack-mounted systems or desktop setups. Extron’s commitment to quality is evident in this product, as it is built to withstand the demands of professional AV environments while ensuring reliability and durability throughout its lifecycle.

With its combination of high-quality signal conversion capabilities, user-friendly design, and robust performance, the Extron DVI-RGB 100 stands as a reliable solution for achieving exceptional video quality in a variety of settings. It is an indispensable tool for anyone looking to optimize their audiovisual experiences.
Top Page Image Contents