How do I turn on/off closed captioning?

If you're getting marginal reception of digital signals, both the picture and sound might freeze or break up to the point that it's not watchable. If you're really on the fringes—either too far from a tower or with too many obstacles in the way—you'll see a black screen that says "No signal."

Reception can vary by channel, depending on the location and broadcast power level of a given station.

oThe video cables you are using may be bad, try a new set.

oPress the CCD button on the remote to select On, On with Mute, or Off.

oAdvanced closed captioning settings can be found in the Menu under Setup.

How do I remove my base?

oThe base is attached via 4 screws that can be found on the back of the TV directly above the base.

Lay the TV face down on the edge of a table or work bench. Make sure to put your TV on a cushion or soft covering to prevent damaging the case or screen.

Remove the 4 screws that secure the stand column to your TV.

Slide the stand out of the TV.

How do I get headphones to work with my TV?

oConnect the headphone cable to the headphone jack on the side of your TV.

oThe sound will be heard through both the headphones and on the TV speakers. o Press Mute to hear sound only through the headphones.

o Use the volume buttons on the remote to adjust the volume level.

o You must remember to press mute again to hear sound through speakers. It will not automatically come on when you unplug the headphones.

I am trying to connect my computer and I have poor picture quality.

oYou may need to adjust the resolution settings on your computer.

To adjust the resolution on Windows XP:

•Click Start to open the Start menu.

•Select and click on Control Panel.

•In category view:

oClick on Appearance and Themes.

oClick Display.

oIn the Display Properties dialog box, click on the Settings tab.

oSelect monitor number 2.

oDrag the screen resolution slider to the left to decrease the resolution of your monitor, making text and pictures appear larger or drag the slider to the right to increase the resolution of your monitor, making text and pictures appear smaller.

oClick Apply to have the new resolution take effect.

oIf the Monitor Settings dialog box appears, look at your display. If you like the new resolution, click Yes. If you do not like the resolution, click No and adjust the resolution using the screen resolution slider.

oClick OK.

•In classic view:

oDouble-click Display.

oIn the Display Properties dialog box, click on the Settings tab. o Select monitor 2.

o Drag the screen resolution slider to the left to decrease the resolution of your monitor, making text and pictures appear larger or drag the slider to the right to increase the resolution of your monitor, making text and pictures appear smaller.

o Click Apply to have the new resolution take effect.

o If the Monitor Settings dialog box appears, look at your display. If you like the new resolution, click Yes. If you do not like the resolution, click No and adjust the resolution using the screen resolution slider.

o Click OK.

To adjust the resolution on Windows Vista:

•Click the Windows icon to open the Start menu.

•Select and click on Control Panel.