I am missing channels.
oIt is possible that the Favorite button was pressed accidentally.
Press the Favorite button on the remote.
oMake sure the channel is not blocked by Parental Controls.
oAre you using a cable/satellite box, cable connected directly to the TV, or an antenna?
If you are using a cable or satellite box you must use the remote that came with that box to change channels.
•Make sure you have the correct input selected to view channels via the cable or satellite box. For example, if the cable or satellite box is connected via component cables please press input and select Component 1 or Component 2 to view your channels.
•Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite provider.
If you are using cable connected directly to the TV:
•Try running an autochannel search:
oPress MENU. The
oPress < or > to select Channel, then press v to access the Channel menu.
oPress ^ or v to select Air/Cable, then press < or > to select Cable.
oPress ^ or v to select Auto Scan. Press > or ENTER.
oPress ^ or v to select Cable System, then press < or > to select your type of cable or satellite system. You can select STD, IRC, HRC, or AUTO. If you are not sure what type of system you have, select AUTO.
oPress ^ or v to select Start to Scan, then press > or ENTER to start scanning. Your TV memorizes all cable channels you receive.
•Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable provider.
If you are using an antenna:
•Try running an autochannel search:
oPress MENU. The
oPress < or > to select Channel, then press v to access the Channel menu.
oPress ^ or v to select Air/Cable, then press < or > to select Air.
oPress ^ or v to select Auto Scan. Press > or ENTER.
oPress ^ or v to select Start to Scan, then press > or ENTER to start scanning. Your TV memorizes all analog and digital channels you receive.
•The signal strength of the channel may be low.
oCheck the signal strength of the channel by pressing the Display button on the remote. The signal strength is displayed in the lower right corner of the Display screen.
•If the signal level is Weak:
•Make sure your antenna is connected securely to the TV.
•Move the antenna around the room or close to a window.
•Use a basic indoor
UHF.
OR
Use a
OR
Use an antenna mounted on your roof or in your attic
•For more information about antennas and the available channels in
your area, visit www.antennaweb.org
oThe UHF band (channels 14 and higher) is more directional than VHF (channels
oIf you're getting marginal reception of digital signals, both the picture and sound might freeze or break up to the point that it's not watchable. If you're really on the
oReception can vary by channel, depending on the location and broadcast power level of a given station.
4