FIRMWARE UPDATE PROCEDURE
The firmware for the GefenTV Ethernet Over Coax can be updated by FTP, TFTP, or a direct file. The firmware update can be executed from either the ADVANCED CONFIGURATION PANEL, or the WEB UTILITY.
UPDATE VIA THE ADVANCED CONFIGURATION PANEL
Firmware updates can be accomplished from the General tab in the ADVANCED CONFIGURATION PANEL. See page 19 for instructions on how to enter the
ADVANCED CONFIGURATION PANEL.
Upgrade Via FTP or TFTP
1.Select the update protocol. Either FTP or TFTP
2.Enter the server IP address
3.Enter the user name and password
4.Enter the name of the file (if the file is not in the root directory of the TFTP or FTP directory, you have to write the whole route from root server directory)
5.Select which section you would like to update (Firmware, Loader or Factory Settings)
6.Click on the firmware update button
Upgrade Via File
1.Use the browse button to the right of the firmware file window and select the firmware update file. You can also manually type the full path to the firmware file
2.Click on the upgrade firmware button
NOTE: This procedure is the same using the web utility. The web update section is located in the change configuration settings, which is accessible from the main page.
27