Panel Descriptions

1Stereo Analog Audio Output

2 RCA stereo analog audio outputs. Connects to the display or a audio Receiver. Only 2 channel LPCM from the HDMI input can be passed to these outputs. Multi-channel bit-stream such as Dolby Digital will not be passed to this output.

2Composite Analog Video Output

RCA composite video output. Connect to a composite input on a television. 480i and 576i are the only resolution output options.

3S-Video Analog Video Output

S-Video video output. Connect to a s-video input on a television. 480i and 576i are the only resolution output options.

4Digital Audio Output

Coaxial digital audio output. Connects to the display or a audio Receiver. 2 channel LPCM and multi-channel bitstream can be output from this connector.

5Video Format Output Switch

Switch between NTSC (60Hz) and PAL (50Hz) output. Please ensure that you use the proper output for you television. Using the wrong format will result in a unrecognizable picture and may damage your television.

6Under/Over Scan Switch

Most analog television sets were designed to accept an over-scanned signal. If the resulting video signal displays a black border around the edges, use the over-scan option. If the resulting video signal is stretched far beyond the television’s edge, use the under-scan option.

7HDMI Input

Connect the HDMI source to this input connector. This will accept both video and audio through the HDMI connector.

85V DC Power Supply Input

Connect the included 5V DC power supply to this input.

9Power LED

This LED will become active once the included power supply is properly connected.