Guest Network Wireless Security Options | NETGEAR WNDR3700V4

N600 Wireless Dual Band Gigabit Router WNDR3700v4

Guest Network Wireless Security Options

A security option is the type of security protocol applied to your wireless network. The security protocol in force encrypts data transmissions and ensures that only trusted devices receive authorization to connect to your network. Wi-Fi Protected Access (WPA) has several options including pre-shared key (PSK) encryption.

This section presents an overview of the security options and provides guidance on when to use which option. It is also possible to set up a guest network without wireless security. NETGEAR does not recommend this.

WPA Encryption

WPA encryption is built into all hardware that has the Wi-Fi-certified seal. This seal means that the product is authorized by the Wi-Fi Alliance (http://www.wi-fi.org/) because it complies with the worldwide single standard for high-speed wireless local area networking.

WPA uses a password for authentication and to generate the initial data encryption keys. Then it dynamically varies the encryption key. WPA-PSK uses Temporal Key Integrity Protocol (TKIP) data encryption, implements most of the IEEE 802.11i standard, and works with all wireless network interface cards, but not all wireless access points.

WPA2-PSK is stronger than WPA-PSK. It is advertised to be theoretically indecipherable due to the greater degree of randomness in encryption keys that it generates. WPA2-PSK gets higher speed because it is usually implemented through hardware, while WPA-PSK is usually implemented through software. WPA2-PSK uses a password to authenticate and generate the initial data encryption keys. Then it dynamically varies the encryption key.

WPS-PSK + WPA2-PSK Mixed Mode can provide broader support for all wireless clients. WPA2-PSK clients get higher speed and security, and WPA-PSK clients get decent speed and security. For help with WPA settings on your wireless computer or device, see the instructions that came with your product.

NETGEAR genie Basic Settings

32

Image 32

NETGEAR WNDR3700V4 user manual Guest Network Wireless Security Options, WPA Encryption

Contents

N600 Wireless Dual Band Gigabit Router WNDR3700v4 October 2013 East Plumeria Drive San Jose, CA Support Contents Netgear genie Advanced Home Advanced Settings Appendix a Supplemental Information Hardware Setup Getting to know your router Front Panel Hardware FeaturesUnpack Your Router Icon Description Back Panel Label Attach the Stand Position Your Router Cable Your Router Verify the Cabling N600 Wireless Dual Band Gigabit Router WNDR3700v4 Connecting the router Getting Started with Netgear Genie Router Setup Preparation Types of Logins and AccessWireless Devices and Security Settings Use Standard TCP/IP Properties for Dhcp Use Netgear genie after Installation Upgrade the Firmware Dashboard Basic Home Screen Basic Home screen with dashboard, language, and online help Join Your Wireless Network Wi-Fi Protected Setup WPS Method To use WPS to join the wireless network Manual Method Netgear genie App and Mobile genie App Netgear genie Basic Settings Your Internet connection and network Basic Home Screen Internet Setup To view or change the basic Internet setup Internet IP Address Internet Setup Screen FieldsDoes Your ISP Require a Login? Answer either yes or no Attached Devices  To go to the Attached Devices screen  To set up Live Parental Controls Parental Controls N600 Wireless Dual Band Gigabit Router WNDR3700v4 ReadySHARE Storage Click the Take me to the status screen button Basic Wireless Settings  To view or change basic wireless settings Region Selection Wireless Settings Screen FieldsWireless Network 2.4 GHz b/g/n and 5 GHz  To change the WPA settings Change WPA Security Option and PasswordSecurity Options Settings  To set up a guest network Select Basic Guest Network Guest Networks Guest Network Wireless Security Options WPA Encryption Specify custom settings Netgear genie Advanced Home Netgear genie Advanced Home Screen Setup Wizard To use the Setup Wizard Select either Push Button or PIN Number WPS Wizard To use the WPS Wizard Select Advanced WPS Wizard Setup Menu WAN Setup Default DMZ Server  To set up a default DMZ server Change the MTU Size Common MTU sizes  To change the LAN settings LAN Setup To change the MTU size Select Advanced Setup WAN Setup Use Router as a Dhcp Server LAN Setup Screen SettingsLAN TCP/IP Setup Address Reservation Use the Router as a Dhcp ServerAddress Reservation Quality of Service QoS Setup Enable WMM QoS for Wireless Multimedia Applications To configure QoS  To reserve an IP address  To create a QoS policy for applications and online games Set Up QoS for Internet AccessQoS for Applications and Online Gaming Click the Add Priority Rule button Select the Turn Internet Access QoS On check boxQoS for a Router LAN Port  To edit or delete a QoS policy Select Advanced QoS Setup QoS for a MAC AddressEdit or Delete an Existing QoS Policy Click Add Priority Rule Accessing and configuring a USB storage Storage ReadySHARE Access  To access the USB device from WindowsFile-Sharing Scenarios Share Photos  To share files with your friends and family Store Files in a Central Location for PrintingShare Large Files over the Internet  To access your USB device Storage Basic Settings To go to Storage Basic Settings Select Basic ReadySHARE Add or Edit a Network Folder Select Basic ReadySHARE, and click Edit Storage Advanced Settings  To go to USB Storage Advanced Settings Available Network Folders Safely Remove a USB DriveMedia Server Specify Approved USB Devices Select the Allow only approved devices check box Access the Router USB Drive Remotely Using FTP  To connect to the router’s USB drive using a web browserConnect to the USB Drive from a Remote Computer Ftp//10.1.65.4 Keep unwanted content out of your network Security Keyword Blocking of Http Traffic Select Advanced Security Block Sites To delete a keyword or domain  To specify a trusted computer Block Services Port Filtering  To block services Select Advanced Security Block Services N600 Wireless Dual Band Gigabit Router WNDR3700v4 Schedule Blocking  To schedule blocking Security Event Email Notifications Administration Manage your network  To check for new firmware and update your router View Router Status Router InformationHardware Version. The router model LAN Port Internet Port Show Statistics Button Connection Status Button View connection status information Wireless Settings 2.4 GHz and 5 GHz View Logs of Web Access or Attempted Web Access Manage the Configuration File Back Up SettingsRestore Configuration Settings Erase Set Password Password Recovery Advanced Settings Customize your network Advanced Wireless Settings Restrict Wireless Access by MAC Address  To restrict access based on MAC addresses Wireless AP Select the Turn Access Control On check box Wireless Repeating Function WDS Select the Enable Access Point Mode check box Wireless repeating scenario  To view or change the Wireless Repeating Function settings Following settings are available Set Up the Base Station  To set up the base station Set Up a Repeater Unit  To configure the router as a repeater unit Remote Computer Access Basics Port Forwarding and Port Triggering Port Triggering to Open Incoming Ports Destination port number Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers  To set up port forwarding  To edit or delete a port forwarding entry Add a Custom ServiceEdit or Delete a Port Forwarding Entry Set Up Port Triggering Click Edit Service or Delete ServiceApplication Example Making a Local Web Server Public  To make a local web server public N600 Wireless Dual Band Gigabit Router WNDR3700v4 Dynamic DNS  To set up Dynamic DNSSelect the Use a Dynamic DNS Service check box Static Routes  To set up a static route Remote Management  To turn on Universal Plug and Play USB SettingsUniversal Plug and Play  To set up an IPv6 Internet connection type IPv6 IPv6 Filtering IPv6 LAN SetupAuto Detect Fields Auto Config 6to4 Tunnel Pass Through Fixed IPv6 Fixed WAN SetupIPb6 Fixed LAN Setup Dhcp PPPoE Traffic Meter Troubleshooting Quick Tips LEDs Never Turn Off Power LED Is Off or BlinkingTroubleshoot with the LEDs Internet LED Is Off Wireless 2.4 GHz and 5 GHz LEDs Are OffCannot Log In to the Router Cannot Access the Internet Incorrect Date or Time Wireless ConnectivityChanges Not Saved Wireless Signal Strength Supplemental Information Factory Settings Factory default settings Technical Specifications WPA2-PSK AES 111 Netgear Dual Band Wireless Notification of Compliance FCC Caution Avertissement Important Note Radiation Exposure Statement