Basic Wireless Settings | NETGEAR WNDR3700V4 specs

N600 Wireless Dual Band Gigabit Router WNDR3700v4

Read Access and Write Access. Shows the permissions and access controls on the network folder: All – no password (the default) allows all users to access the network folder. The user name (account name) for All – no password is guest. The password for admin is the same one that you use to log in to the router. By default, it is password.

Folder Name. Full path of the network folder.

Volume Name. Volume name from the USB storage device.

Total Space and Free Space. Shows the current utilization of the storage device.

•Edit. Click the Edit button to edit the Available Network Folders settings.

•Safely Remove USB Drive. Safely remove the USB device attached to your router.

You can click Refresh to update this screen. For more information about USB storage, see Chapter 5, Storage.

Basic Wireless Settings

The Wireless Settings screen lets you view or configure the wireless network setup.

The router comes with preset security. This means that the Wi-Fi network name (SSID), network key (password), and security option (encryption protocol) are preset in the factory. You can find the preset SSID and password on the bottom of the unit.

Note: The preset SSID and password are uniquely generated for every device to protect and maximize your wireless security.

To view or change basic wireless settings:

NETGEAR recommends that you do not change your preset security settings. If you change your preset security settings, make a note of the new settings and store it in a safe place where you can easily find it.

If you use a wireless computer to change the wireless network name (SSID) or other wireless security settings, you are disconnected when you click Apply. To avoid this problem, use a computer with a wired connection to access the router.

NETGEAR genie Basic Settings

28

Image 28

NETGEAR WNDR3700V4 user manual Basic Wireless Settings,  To view or change basic wireless settings

Contents

N600 Wireless Dual Band Gigabit Router WNDR3700v4 October 2013 East Plumeria Drive San Jose, CA Support Contents Netgear genie Advanced Home Advanced Settings Appendix a Supplemental Information Hardware Setup Getting to know your router Unpack Your Router Hardware FeaturesFront Panel Icon Description Back Panel Label Attach the Stand Position Your Router Cable Your Router Verify the Cabling N600 Wireless Dual Band Gigabit Router WNDR3700v4 Connecting the router Getting Started with Netgear Genie Router Setup Preparation Types of Logins and AccessWireless Devices and Security Settings Use Standard TCP/IP Properties for Dhcp Use Netgear genie after Installation Upgrade the Firmware Dashboard Basic Home Screen Basic Home screen with dashboard, language, and online help Join Your Wireless Network Wi-Fi Protected Setup WPS Method To use WPS to join the wireless network Manual Method Netgear genie App and Mobile genie App Netgear genie Basic Settings Your Internet connection and network  To view or change the basic Internet setup Internet SetupBasic Home Screen Does Your ISP Require a Login? Answer either yes or no Internet Setup Screen FieldsInternet IP Address Attached Devices  To go to the Attached Devices screen  To set up Live Parental Controls Parental Controls N600 Wireless Dual Band Gigabit Router WNDR3700v4 ReadySHARE Storage Click the Take me to the status screen button Basic Wireless Settings  To view or change basic wireless settings Wireless Network 2.4 GHz b/g/n and 5 GHz Wireless Settings Screen FieldsRegion Selection Security Options Settings Change WPA Security Option and Password To change the WPA settings  To set up a guest network Select Basic Guest Network Guest Networks Guest Network Wireless Security Options WPA Encryption Specify custom settings Netgear genie Advanced Home  To use the Setup Wizard Setup WizardNetgear genie Advanced Home Screen  To use the WPS Wizard Select Advanced WPS Wizard WPS WizardSelect either Push Button or PIN Number Setup Menu WAN Setup Default DMZ Server  To set up a default DMZ server Change the MTU Size Common MTU sizes  To change the MTU size Select Advanced Setup WAN Setup LAN Setup To change the LAN settings LAN TCP/IP Setup LAN Setup Screen SettingsUse Router as a Dhcp Server Address Reservation Use the Router as a Dhcp ServerAddress Reservation Quality of Service QoS Setup Enable WMM QoS for Wireless Multimedia Applications To configure QoS  To reserve an IP address QoS for Applications and Online Gaming Set Up QoS for Internet Access To create a QoS policy for applications and online games QoS for a Router LAN Port Select the Turn Internet Access QoS On check boxClick the Add Priority Rule button  To edit or delete a QoS policy Select Advanced QoS Setup QoS for a MAC AddressEdit or Delete an Existing QoS Policy Click Add Priority Rule Accessing and configuring a USB storage Storage ReadySHARE Access  To access the USB device from WindowsFile-Sharing Scenarios Share Photos Share Large Files over the Internet Store Files in a Central Location for Printing To share files with your friends and family  To go to Storage Basic Settings Select Basic ReadySHARE Storage Basic Settings To access your USB device Add or Edit a Network Folder Select Basic ReadySHARE, and click Edit Storage Advanced Settings  To go to USB Storage Advanced Settings Media Server Safely Remove a USB DriveAvailable Network Folders Specify Approved USB Devices Select the Allow only approved devices check box Access the Router USB Drive Remotely Using FTP  To connect to the router’s USB drive using a web browserConnect to the USB Drive from a Remote Computer Ftp//10.1.65.4 Keep unwanted content out of your network Security Keyword Blocking of Http Traffic Select Advanced Security Block Sites To delete a keyword or domain  To specify a trusted computer Block Services Port Filtering  To block services Select Advanced Security Block Services N600 Wireless Dual Band Gigabit Router WNDR3700v4 Schedule Blocking  To schedule blocking Security Event Email Notifications Administration Manage your network  To check for new firmware and update your router View Router Status Router InformationHardware Version. The router model LAN Port Internet Port Show Statistics Button Connection Status Button View connection status information Wireless Settings 2.4 GHz and 5 GHz View Logs of Web Access or Attempted Web Access Manage the Configuration File Back Up SettingsRestore Configuration Settings Erase Set Password Password Recovery Advanced Settings Customize your network Advanced Wireless Settings Restrict Wireless Access by MAC Address  To restrict access based on MAC addresses Wireless AP Select the Turn Access Control On check box Wireless Repeating Function WDS Select the Enable Access Point Mode check box Wireless repeating scenario  To view or change the Wireless Repeating Function settings Following settings are available Set Up the Base Station  To set up the base station Set Up a Repeater Unit  To configure the router as a repeater unit Remote Computer Access Basics Port Forwarding and Port Triggering Port Triggering to Open Incoming Ports Destination port number Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers  To set up port forwarding Edit or Delete a Port Forwarding Entry Add a Custom Service To edit or delete a port forwarding entry Set Up Port Triggering Click Edit Service or Delete ServiceApplication Example Making a Local Web Server Public  To make a local web server public N600 Wireless Dual Band Gigabit Router WNDR3700v4 Select the Use a Dynamic DNS Service check box  To set up Dynamic DNSDynamic DNS Static Routes  To set up a static route Remote Management Universal Plug and Play USB Settings To turn on Universal Plug and Play  To set up an IPv6 Internet connection type IPv6 Auto Detect Fields IPv6 LAN SetupIPv6 Filtering Auto Config 6to4 Tunnel Pass Through IPb6 Fixed LAN Setup IPv6 Fixed WAN SetupFixed Dhcp PPPoE Traffic Meter Troubleshooting Quick Tips Troubleshoot with the LEDs Power LED Is Off or BlinkingLEDs Never Turn Off Cannot Log In to the Router Wireless 2.4 GHz and 5 GHz LEDs Are OffInternet LED Is Off Cannot Access the Internet Changes Not Saved Wireless ConnectivityIncorrect Date or Time Wireless Signal Strength Supplemental Information Factory Settings Factory default settings Technical Specifications WPA2-PSK AES 111 Netgear Dual Band Wireless Notification of Compliance FCC Caution Avertissement Important Note Radiation Exposure Statement