Gefen GTV-HDMI-2-COMPSVIDS user manual Connecting and Operating Hdmi to COMPOSITE/S-VIDEO Scaler

CONNECTING AND OPERATING THE

HDMI TO COMPOSITE/S-VIDEO SCALER

How to Connect the HDMI To Composite/S-Video Scaler

1.Connect the HDMI source to the HDMI To Composite/S-Video Scaler’s HDMI input using the supplied HDMI cable.

2.Connect the display to the HDMI To Composite/S-Video Scaler’s composite or s-video outputs using user supplied cables.

3.Connect the HDMI To Composite/S-Video Scaler’s stereo analog audio output to the display or audio Receiver. Optionally, you can connect the digital coaxial output to the display or an audio Receiver.

4.Ensure that the proper video output format is set using the NTSC/PAL format switch on the rear panel of the unit. Please consult your television’s manual for the proper input format type.

5.Connect the included 5V DC power supply to the HDMI To Composite/S- Video Scaler.

6.Once you have a video image on-screen, use the under/over scan switch to adjust the image’s size.

NOTE: The HDMI To Composite/S-Video Scaler will cross convert between some digital audio formats. Both the digital and analog audio outputs are active at all times. The HDMI To Composite/S-Video Scaler will not, however, down-mix multi- channel digital audio formats to 2 channel analog stereo. Please see the chart below for supported input and output formats.

INPUT ►	HDMI	HDMI	HDMI
	MULTICHANNEL	2 CHANNEL	DOLBY DIGITAL
OUTPUT ▼
	LPCM	LPCM	& DTS
DIGITAL	YES	YES	YES
COAXIAL	*2 CHANNEL
ANALOG
STEREO	NO	YES	NO
MINI-JACK

*2 channels are the front right and front left speakers. It will not down-mix multi-channel to 2 channel audio

E