Switching ON/OFF the Unit

OPERATION

Switch on the unit by pressing / POWER button (1) on the front panel or POWER button (34) on the remote control. When system is on, press it again to turn the unit off.

OPEN/CLOSE THE MONITOR AND ANGLE ADJUSTMENT

Press OPEN/CLOSE button (2) on the front panel or point the remote control to IR (10) on the front panel and press OPEN button (35), the monitor will stretch automatically.

OPEN/CLOSE button

Fig.1

When the monitor stretches to a certain location, it will turn upward automatically and stop at vertical position.

Fig.2

Adjusting the viewing angle.

When the monitor doesn't move, you can press ANGLE+ button (49) or ANGLE button (50) on the remote control to turn the monitor upward or downward at fine steps to get a desired viewing angle. And you can rotate the monitor left and right from the central viewing position at a certain angle range manually.

Don't rotate the monitor forcibly to avoid mechanical damage.

Fig.3

Return the monitor to the central viewing position, then press OPEN/CLOSE button (2) on the front panel or press OPEN button

(35)on the remote control, the monitor will turn downward automatically.

Fig.4

When the monitor turns downward to a certain angle, it will draw in.

Fig.5

NOTE:

When the monitor is on the central viewing position, switch the ignition key to "ACC OFF", the monitor will turn downward and draw in automatically.

When the monitor is on the central viewing position, disconnect the battery cable and then reconnect the battery cable, the monitor will turn downward and draw in automatically.