Menu Control operation in CDC mode

OPERATION

Then you can press VOL / buttons

(48)to select hour or minute and press TUN/CH/ buttons (47) to change the corresponding item.

Press MODE button (12) on front panel or MODE button (43) to select CDC mode. The following information will appear on the display (5).

CDC PLAY 00:12

VOLUME	36	DISC	01
BASS	0	TRACK	01
TREBLE	0
BALANCE	L-R
FADER	F-R
LOUD	OFF
EQ	FLAT

Press MENU button (19) or (45), the VOLUME will be selected, then press TUN/CH / buttons (46) to select the item upward or downward. Then press VOL / buttons (48) to adjust the selected item. The corresponding value will show on the display.

Respectively press PAU (28), INT (29), RPT (30), RDM (31), CD- (32), CD+ (33) button on the panel to enter the corresponding function referring to the CDC operation described above, the corresponding information (such as PAUSE, INTRO, REPEAT, RANDOM and the disc number) will appear on the display (5).

CDC PLAY 00:24

VOLUME	36	DISC	03
BASS	0	TRACK	02
TREBLE	0
BALANCE	L-R
FADER	F-R
LOUD	OFF
EQ	FLAT	REPEAT

Directly press TUNING/TRACK button

(14)on the panel to move to the s previou track; press TUNING/TRACK button (13) on the panel control to move to the next track.

TV operation (when the unit is connected to other TV unit through the cable with the 13-pin din plug on each terminal)

Switching to TV mode

Press MODE button (12) on the front panel or MODE button (42) on remote control to select TV mode and the memory channel will show on the TFT display (5).

Selecting receiving mode

In TV mode, press TV/AV button (21) or (41) to select among TV/ AV1/AV2/ RGB (optional). The corresponding state will show on the TFT display (5). When you connect the RGB terminals on the back of the unit to the corresponding RGB system, then press MODE button on remote control to select RGB mode, the RGB signal will appear on the screen. Note: You can receive the TV/AV1 /AV2 mode when you brake the car.

If you are driving the car, you can't receive the picture signal in TV/AV1 /AV2 just receive the sound signal, it is blue screen then.

Selecting channel

-Press CHANNEL button (24) or TUN/CH button on remote control to choose channel upward and or Press CHANNEL button (25) or TUN/CH button on remote control to choose channel downward.

-The numeric buttons (0,1~9) (36) allow you to select the corresponding channel directly.

-Press digital select button (-/--) (39) cooperatively used with numeric buttons to select channel desired. For example, when you want select 16 channel, press -/-- (39) to switch between "-" and "--", when the "--" appears on the