Operating When the Monitor Stretching OUT

OPERATION

OPERATING WHEN THE MONITOR STRETCHING OUT

When the monitor stretches out, the front panel of the unit is in state B (see Fig.B), you can operate the unit by using the current menu displayed on the 6.5 inch color TFT display (5).

And if the unit is connected to other TV unit through the cable with the 13-pin din plug on each terminal, there have radio mode, TV mode and CDC mode to be selected. When the unit isn't connected to other TV unit through the cable, there have radio mode, AV mode and CDC mode to be selected.

The other operations are the same with the operation when the front panel in state A and those will not be described below,you can refer to the above details.

Menu Control operation in radio mode

Press MODE button (12) on front panel or MODE button (42) on remote control to select radio mode. The following information will appear on the display (5).

FM1 87.5 MHz
	STEREO DX
VOLUME	36	M1	87.50
BASS	0	M2	90.10
TREBLE	0	M3	98.10
BALANCE	L-R	M4	106.10
FADER	F-R	M5	108.00
LOUD	OFF	M6	87.50
EQ	FLAT

Press MO/ST button (16) on the front panel or ST/MO button (53) on remote control to select "MONO" or "STEREO".

FM1 98.10 MHz

MONO LOC

VOLUME	30	M1	87.50
BASS	2	M2	90.10
TREBLE	2	M3	98.10
BALANCE	L-R	M4	106.10
FADER	F-R	M5	108.00
LOUD	ON	M6	87.50
EQ	POP

When press DSP button (20) on the front panel or DISP button (44) on remote control, the current time appears on the screen display (5) and LCD (4). And the clock on the screen display (5) will not disappear if you don't operate

it after several seconds, but the clock on the LCD will disappear. Press DSP button

(20)or DISP button (44) again, the clock on the screen display (5) will disappear. Then press the button once again, the clock will appear again.

FM1 87.5 MHz
	STEREO DX
		10:12:22
VOLUME	36	M1	87.50
BASS	0	M2	90.10
TREBLE	0	M3	98.10
BALANCE	L-R	M4	106.10
FADER	F-R	M5	108.00
LOUD	OFF	M6	87.50
EQ	FLAT

Press MENU button (19) or (45), the VOLUME will be selected, then press TUN/CH / buttons (46) to select the item upward or downward. Then press VOL / buttons (47) to adjust the selected item. The corresponding value will show on the display.

Press any one of the Radio Preset buttons (1~6) (37) to retrieve a station between M1~M6. The corresponding number will show on the display. Press LOC button (38) on remote contro lto select between "LOC" and "DX".

When the clock appears on the screen display, hold DSP button (20) or DISP button (44) to select 10 for hours:

FM1 87.5 MHz
	STEREO DX
		10:12:22
VOLUME	36	M1	87.50
BASS	0	M2	90.10
TREBLE	0	M3	98.10
BALANCE	L-R	M4	106.10
FADER	F-R	M5	108.00
LOUD	OFF	M6	87.50
EQ	FLAT

OPERATION