ViewSonic VS11856 user manual Aspect Ratio, Picture Modes

Page 18

Aspect Ratio

Picture Modes

Selections of screen proportion.

Press on the remote control to browse through available aspect ratio options.

Normal: Browse through standard aspect ratio modes.

Anamorphic 1: Use in conjunction of 16:9 to 2.35:1 conversion lens. Morphing a 2.35:1 film content from a 16:9 letter box to a full screen 2.35:1 output.

Anamorphic 2: Use in conjunction of 16:9 to 2.35:1 conversion lens. Morphing a 4:3 or 16:9 film contents from a 16:9 format to a 2.35:1 format.

Note: Requires use of optional .Anamorphic lens. ViewSonic does not provide this optional lens. For more details on where to purchase the Anamorphic 2.35:1 lens, please visit www.viewsonic.com

Selections of picture modes, for easy access to ViewSonic customized presets and customized settings.

Press on the remote control to browse through avail- able picture modes.

All: Browse through Normal, Vivid, Cinema and Professional picture mode.

CUST 1: Recall customized setting 1.

CUST 2: Recall customized setting 2.

 

 

 

Normal: Image is presented in original content.

 

 

 

All special enhancement features are off.

 

 

 

 

 

 

 

Vivid: High contrast, richer color and detail en-

 

 

 

hancement. Attention: Extended viewing may

 

 

 

cause fatigue to the eyes.

 

 

 

 

 

9

 

Cinema: Emphasis on enhancements of skin tone

 

 

performance and cinematic effect.

 

 

 

 

 

 

 

 

 

 

Professional: Emphasis on grayscale accuracy and

 

 

 

color performance.

 

 

 

 

1

 

Cust 1: Recall customized settings 1.

 

 

 

 

2

 

Cust 2: Recall customized settings 2.

 

 

 

 

14

Image 18 Contents
Precision by ViewSonic Compliance Information Product Registration Declaration of RoHS ComplianceCopyright Information For Your RecordsCompliance Information InstallationRemote Control IntroductionProjector Features Package ContentsIntroduction Projector Overview Control PanelMenu Connection ports Remote ControlPower Color TempLens Shift Input SelectLight ZOOM/FOCUSInstalling the Batteries Remote Control OperationAudio and Video Devices Connectivity Configuration InstallationPower connection HdmiInstallation Pro8100 RGB Adjusting the Projected Image Adjusting Projection Image Size Projection Screen SelectionRemote Control direct access Power LightOFF Lens Shift Zoom and FocusAspect Ratio Picture ModesPCS on Color TemperaturePCS Precision Color System PCS OFFHQV on Black LevelHQV HQV OFFDaylight Sensor Input SelectDirect Input Keys Remote Control direct access Main Menu Setup Menu Advanced Operation OSD MenuPicture Sub-Menu Basic Sub-MenuPosition 71 Color Temperature Sub-Menu Image Adjust Sub-MenuPhase Position 75Overscan ManualGeometry Adjust Advanced Sub-Menu KeystoneAuto Auto V.KEYSTONE OFF Picture Mode LOW MID High Blacker than Black3 HQV LTI OFF CTIEnhancement Noise Reduction TNR MNR BAR OFFColor Space Config Sub-Menu RGBAuto Projector Settings 2 OSD Languages Timeout Transparency TypeTimeout 30 LocationTimers High AltitudeAuto Iris PCS Settings Sub-Menu Auto Iris OFFUser PCS OFF 1 PCSPCS Display UserFlesh tone Edge Enhancement ColorGreen Enhance Blue Cyan Magenta Yellow Gamma Correction6 3D Color Management ColorMemory Settings Sub-Menu Custom ColorLoad Custom Color Temperature Green Gain Blue Gain RED Offset Green Offset Blue OffsetSave SaveLoad LoadReset System Status ScreenMENU/EXIT Daylight sensor status Indication if System temperature status, display if system Making and Recalling the User Adjustments Making Adjustments User Picture Mode AdjustmentsUser Color Temperature Adjustments User PCS Adjustments Recalling the User Picture Mode & Color TemperatureRecalling the User PCS Adjustments Recalling Both User Picture Mode and User PCS Custom 1Making and Recalling the User Adjustments Appendix Appendix Replacing the LampTroubleshooting List of Compatible SignalsSXGA+ WSXGA+Uxga LED Indicator Message Product SpecificationRS232 command code HDMI-1HDMI-2 Key-Pad & IR command Command Send String HEX Remote control code Complete IR command code tableCustomer Support Country/Region Web Site =Telephone Mail =FaxLimitation of implied warranties