4. PCS
Selection of PCS mode.
PCS On: Use ViewSonic default PCS settings.
USER: Use user defined PCS settings.
PCS Off: Turn off all PCS settings.
5.INPUT SELECT
All: Browse through HDMI 1/2, Component Video 1/2, Composite,
HDMI 1: Direct access key for HDMI 1 input.
HDMI 2: Direct access key for HDMI 2 input.
Component Video 1: Direct access key for Component Video 1.
Component Video 2: Direct access key for Component Video 2.
Composite Video and
6.LIGHT
Keypad Light Enable. Keypad will also light up if any other remote control key is pressed.
7.LENS SHIFT
Motorized vertical and horizontal lens shift for positioning display image without physically moving the unit.
8.ZOOM/FOCUS
Motorized zoom and focus adjust.
9.ASPECT RATIO
Selections of screen proportion.
Normal: Browse through Standard, Full Screen, Crop and Flexview aspect ratios.
Anamorphic 1: Use in conjunction of 16:9 to 2:35:1 conversion lens.
Anamorphic 2: Use in conjunction of 16:9 to 2:35:1 conversion lens.
Note: Requires use of optional .Anamorphic lens. ViewSonic does not provide this optional lens. For more details on where to purchase the Anamorphic 2.35:1 lens, please visit www.viewsonic.com
10. FOUR DIRECTIONAL BUTTONS
Use four directional buttons to select items or make adjustments to your selection. 11. ENTER
To confirm selected menu item. 12. EXIT
To Exits the
Selections of picture modes, for easy access to ViewSonic customized presets and customized settings. All: Browse through Normal, Vivid, Cinema and Professional picture mode.
Custom 1: Recall customized setting 1.
Custom 2: Recall customized setting 2.
14.HQV
HQV enable.
On: Use ViewSonic default HQV settings.
Off: Turn off all HQV settings.
Note: User defined HQV settings can only be accessed in the OSD.
15.DAYLIGHT SENSOR Daylight sensor enable.
Auto: Daylight mode bases on light sensor detection.
Manual: Manually selects daylight mode.
Off: Turn off daylight mode.
16.BLACK LEVEL
Defines the brightness levels at the darkest visual image point.