Note:
1.No Video
When the monitor is ON and there is no Video signal received, the following message will be displayed.
2.Signal out of monitor’s supported range (Please refer to Addendum)
When the frequency range of the signal is out of the monitor’s specifications, the display will show the following message on two cases:
Case 1:
The incoming frame rate is higher than 75Hz.
In this case, the screen display may not be centered and a warning message appears.
Case 2:
The incoming resolution is higher than 1280x1024.
In this case, the video data will be turned off and a warning message appears at center.
15