Emerson LC320EM8A Entered channel number, Changes automatically, Control, Unit, Screen dialogue

Page 33

Symptom

Remedy

The entered channel number

• Many digital channels have alternate channel numbers. The unit changes the

changes automatically

numbers automatically to the ones signifying the broadcasting stations. These are

 

the numbers used for analog broadcasts.

Remote control does not work

• Check the antenna or cable connection to the main unit.

 

• Check the batteries of the remote control.

 

• Check if there is an obstacle between the infrared sensor window and the remote

 

control.

 

• Test the signal output. If OK, then possible infrared sensor trouble.

 

(Refer to “IR Signal Check” on page 34.)

 

• Aim the remote control directly at the infrared sensor window on the front of the

 

unit.

 

• Reduce the distance to the unit.

 

• Re-insert the batteries with their polarities (+/– signs) as indicated.

 

• When there is an infrared-equipped device such as PC near this unit, it may

 

interrupt the remote control signal of this unit.

 

Move the infrared-equipped device away from this unit, change the angle of the

 

infrared sensor or turn off the infrared communication function.

 

Problems with Closed Caption Feature

 

 

Misspelled captions are

• Closed captioning production companies may broadcast programs without

displayed.

correcting the misspelling in a live broadcast.

Captions are not entirely

• Captions that are delayed a few seconds behind the actual dialogue are common

displayed, or captions are

for live broadcasts. Most captioning production companies can display a dialogue

delayed behind the dialogue.

to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective

 

editing is used to insure that the captions remain up-to-date with the current TV

 

screen dialogue.

Captions are displayed as a

• Interference from buildings or weather conditions may cause captioning to be

white box.

incomplete.

No caption is displayed in the

• Broadcasting station may shorten the program to insert advertisement. The closed

closed caption-supported

caption decoder cannot read the information of the shortened program.

program.

 

No caption is displayed

• The videotape may be illegally copied, or the caption signal might not have been

when playing the videotape

read during copying.

containing captions.

 

Black box is displayed in the

• “Text” mode is selected for caption. Select “CC1”, “CC2”, “CC3”, “CC4”or “Off”.

TV screen.

 

Note:

•The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red. This is not to be considered a defect in the LCD screen.

•Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for more details on correct operations.

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION

33

EN

Page 32 Page 34
Image 33
Page 32 Page 34
Contents LC320EM8A Important note is located on the rear of the cabinet IntroductionRADIO-TV Interference PrecautionsSymbols Used in this Manual Supplied AccessoriesRemote control LocationFeatures ContentsDTV/TV/CATV Installing the Batteries Remote Control FunctionRear Panel Control PanelBasic Connection ConnectionAntenna Cable Connection Connection to Cable Box or Satellite BoxExternal Device Connection Hdmi ConnectionHDMI-DVI Connection Video Cable Connection Component Video Cable ConnectionVideo Connection Audio Output Connection DigitalAnalog Initial Setup Initial SettingMake sure if the unit is connected to antenna or cable Scanning and memorizing of channels start automaticallyAuto Channel Scan Main MenuPress Setup to exit Language SelectionLanguage 5Volume Adjustment Watching TVChannel Selection Switching Each Mode Still ModeYou can freeze the image shown on the TV screen To use the Hdmi in jack on the unit, select HdmiStereo Switching Audio ModeSAP MonoPress Info Screen InformationBroadcasting Information Day of MemoriesiTV Screen Display Mode Sleep Timer Press Sleep to set the sleep timerTo Cancel the Sleep Timer Optional Setting Channel List5Manual Register Antenna Antenna ConfirmationPicture Adjustment Closed Caption DTV Closed Caption DTV CCUse Cursor K/L to select DTV CC, then press CC Style Font StyleFont Size Font Opacity Font ColorBack Color Back OpacityChipip Enter password See the following description for setting each itemChip Use Cursor K/L to select V-chip, then pressUse Cursor K/L to select Mpaa Rating, then press Enter Press Setup to exitView and Block To Set the Sub RatingsChipip Enter password Confirm password Use Cursor K/L to select New Password, then press EnterHdmi Audio You can set the method of sound input for the Hdmi in jackUse Cursor K/L to select Hdmi Audio, then press Troubleshooting Guide TroubleshootingRefer to IR Signal Check on Check the batteries of the remote controlInterrupt the remote control signal of this unit Delayed behind the dialogueInformation MaintenanceGlossary AtscElectrical Specification General SpecificationsOther Specifications Cable Channel DesignationsLimited Warranty
Top Page Image Contents