Emerson LC320EM8A DTV Closed Caption, Dtv Cc, Use Cursor K/L to select DTV CC, then press

Page 25

5DTV Closed Caption

DTV

In addition to the basic closed caption described on page 24, DTV has its own closed caption called DTV CC. Use this menu to change the settings for

DTV CC.

1 Press [SETUP] to display the main menu.

2 Use [Cursor K/L] to select “DETAIL”, then press

[ENTER].

3 Use [Cursor K/L] to select “Closed Caption”, then press [ENTER].

Detailil

Closed Caption

V–chip

HDMI Audio

Auto

4 Use [Cursor K/L] to select “DTV CC”, then press

[ENTER].

		Closedl	Captioni
		Closedl	Captioni
		Conventional CC		Off
		DTV CC		Off
		CC Style

5 Use [Cursor K/L] to select the desired DTV closed caption, then press [ENTER].

	Closedl	Captioni
	Closedl	Captioni
	Conventional CC
	DTV CC		Off
	CC Style		Service1
			Service2
			Service3
			Service4
			Service5
			Service6

	Off	Select if you do not want
	Off	DTV CC. This is the default.
		DTV CC. This is the default.

DTV CC		Select one of these before
DTV CC		changing any other item
		changing any other item
	Service1~6	in “Closed Caption” menu.
		Choose “Service1” under
		normal circumstances.

6 Press [SETUP] to exit.

Note:

•“DTV CC” that you can switch differs depending on the broadcast description.

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION

25

EN

Image 25

Contents LC320EM8A Important note is located on the rear of the cabinet IntroductionRADIO-TV Interference PrecautionsSymbols Used in this Manual Supplied AccessoriesRemote control LocationContents FeaturesDTV/TV/CATV Installing the Batteries Remote Control FunctionRear Panel Control PanelBasic Connection ConnectionAntenna Cable Connection Connection to Cable Box or Satellite BoxHdmi Connection External Device ConnectionHDMI-DVI Connection Video Cable Connection Component Video Cable ConnectionAudio Output Connection Digital Video ConnectionAnalog Initial Setup Initial SettingMake sure if the unit is connected to antenna or cable Scanning and memorizing of channels start automaticallyAuto Channel Scan Main MenuLanguage Selection Press Setup to exitLanguage Watching TV 5Volume AdjustmentChannel Selection Switching Each Mode Still ModeYou can freeze the image shown on the TV screen To use the Hdmi in jack on the unit, select HdmiStereo Switching Audio ModeSAP MonoPress Info Screen InformationBroadcasting Information Day of MemoriesiTV Screen Display Mode Press Sleep to set the sleep timer Sleep TimerTo Cancel the Sleep Timer Channel List Optional Setting5Manual Register Antenna Antenna ConfirmationPicture Adjustment Closed Caption DTV CC DTV Closed CaptionUse Cursor K/L to select DTV CC, then press Font Style CC StyleFont Size Font Opacity Font ColorBack Color Back OpacityChipip Enter password See the following description for setting each itemChip Use Cursor K/L to select V-chip, then pressUse Cursor K/L to select Mpaa Rating, then press Enter Press Setup to exitView and Block To Set the Sub RatingsChipip Enter password Confirm password Use Cursor K/L to select New Password, then press EnterYou can set the method of sound input for the Hdmi in jack Hdmi AudioUse Cursor K/L to select Hdmi Audio, then press Troubleshooting Guide TroubleshootingRefer to IR Signal Check on Check the batteries of the remote controlInterrupt the remote control signal of this unit Delayed behind the dialogueInformation MaintenanceGlossary AtscElectrical Specification General SpecificationsOther Specifications Cable Channel DesignationsLimited Warranty