INTRODUCTION
5Buttons on the Remote Control
CH. RECALL
1.POWER (p12)
Press to turn the unit on and off.
2.Number buttons (p15)
•Press to select channels.
- (hyphen)
•Press to shift the minor channel from the major channel.
3.SETUP (p13)
Press to display the main menu.
4.s / B / K / L (p12)
Press to move left/ right/ up/ down through the items.
5.ENTER (p12)
Press to decide the command of setting when the main menu is displayed.
6.BACK (p17)
Press to return to the previous menu operation.
7.CH. RECALL (p15)
Press to return to the previous channel.
8.VOL. X/Y (p15)
Press to adjust the volume.
9.MUTE (p15)
Press to turn the sound on and off.
10.INPUT SELECT (p16) Press to access connected external devices like a DVD player or VCR.
11.SLEEP (p15)
Press to activate the sleep timer.
12.AUDIO (p16)
Digital Mode (DTV)
• Press to select the audio
language.
Analog Mode (TV)
•Press to select the audio mode.
13.STILL (p16)
Press to pause screen image.
14.SCREEN MODE (p18) Press to select aspect ratio available for the TV screen.
15.INFO (p17)
Digital Mode (DTV)
•Press to display the channel information, signal type and TV
setting.
Analog Mode (TV)
•Press to display the channel number, signal type and TV
setting.
External Input Mode
•Press to display the external input modes, signal type and TV setting.
16.CH K/L (p15)
Press to select channels and the external input modes.
5Installing the Batteries
Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control.
Battery Precautions:
•Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.
•Do not mix different types of batteries together (e.g., Alkaline and
•If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
•Do not try to recharge batteries; they can overheat and rupture.
6
EN