Emerson LC321EM9 owner manual 5Manual Register, 5Antenna Confirmation

5Manual Register

The manual register function lets you add the channels that were not scanned by the auto channel scan due to the reception condition at the initial setup.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

5Antenna Confirmation

DTV

This function lets you check the digital signal strength of each channel.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

INTRODUCTION PREPARATION WATCHING TV

	3 Use [Cursor K/L] to select “Antenna”, then press
3 Use [Cursor K/L] to select “Manual Register”, then	[ENTER].
press [ENTER].

Channell

Channell	Autoscan
	Channel List
Autoscan	Manual Register
Channel List	Antenna
Manual Register

Antenna

		4 Use [the Number buttons] or [CH K/L] to select the
		channel for which you want to check the digital signal
4 Use [the Number buttons] to enter the number of the
		strength.
channel you want to add, then press [ENTER].
	11
			11-1

Manuall Registeri	Antenna
For analog channels, select a	Register		Back
channel to register using number
keys.
For digital channels, you must
perform Autoscan function.
	Now	70 Peak	80
Ch Change	BACK
	Back	Ch Change
	CH

OPTIONAL SETTING TROUBLESHOOTING INFORMATION

5Press [SETUP] to exit.

Note:

•If set up completes successfully, “Registered to the channel list” is displayed.

•If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

•By using [CH K/L], you can select the memorized channels only.

•If the channel is set to analog channel or external input, you cannot confirm the antenna condition.

11

Antenna

Back

Indicator is available for digital broadcasting only.

CH Ch Change

5Press [SETUP] to exit.

19

EN