Emerson LC195EM82 owner manual Optional Setting, 5Channel Add/Delete

OPTIONAL SETTING

5Channel Add/Delete

The channel add/delete function lets you add the channel that was not added by the auto channel scan due to the reception status at the initial setting. You can also delete the unnecessary channels.

1Press [SETUP] to display the main menu.

2Use [Cursor K / L] to select “CHANNEL SETUP”, then press [ENTER].

e.g.) digital TV mode

3Use [Cursor K / L] to select “ADD/DELETE(DTV)” or “ADD/DELETE”, then press [ENTER].

6Press [SETUP] to exit.

Note:

•”ADD/DELETE(DTV)” or “ADD/DELETE” menu will disappear automatically in a few seconds.

•In the digital mode (DTV), you can add or delete channels only for major channel.

•Once you delete a DTV channel, you cannot recover the channel without performing auto channel scan again. (Refer to “Auto Channel Scan” on page 12.)

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING

4Select the channel you want to add or delete. (Refer to “Channel Selection“ on page 13.)

e.g.) digital TV mode

D25

ADD/DELETE : DTV

5Use [Cursor s / B] to select “ADD” or “DELETE”.

or

•To add or delete another channels, repeat steps 4-5.

•Color of channel number displayed at the right top of the TV screen indicates;

-Blue: The selected channel will be added.

-Red: The selected channel will be deleted.

TROUBLESHOOTING INFORMATION