OPTIONAL SETTING
C. Change Password
Although the default code “0000” is supplied with the unit, you can set your own password.
4Use [Cursor K / L] to select “CHANGE PASSWORD”, then press [ENTER].
e.g.) digital TV mode
or
- V - CHIP SETUP -
TV RATING MPAA RATING DOWNLOADABLE RATING 
CHANGE PASSWORD
5Press [the Number buttons] on the remote control to enter the new
•Enter password again in “CONFIRM PASSWORD” space.
NEW PASSWORD
_ _ _ _
CONFIRM PASSWORD
_ _ _ _
6Press [SETUP] to exit.
Note:
•Make sure new password and confirm password must be exactly the same. If they are different, the space is cleared for reentering.
•Your password will be erased and return to the default (0000) when a power failure occurs. If you forget the password, unplug the power cord for 10 seconds to restore the password to 0000.
24
EN