ViewSonic PJ751 manual Operation, Power on, Power OFF

Page 16

OPERATION

POWER Indicator	STANDBY/ON Button STANDBY/ON
	Button

ZOOM Knob

FOCUS Ring

Power Switch

Lens cap

Power ON

1Check to be sure the power cord is connected correctly.

2Set the power switch to [I]. When the standby mode is selected, the POWER indicator is orange.

3Press the STANDBY/ON button on the control panel or the remote control device. The warm-up starts and the POWER indicator blinks green.

4The POWER indicator stops blinking and turns green when the power is on.

5Remove the lens cap.

6Adjust picture size using the ZOOM Knob.

7Adjust focus with the FOCUS Ring.

Power OFF

1Press the STANDBY/ON button on the control panel or the remote control device. The message "Power off?" will appear on the screen. The message will disappear by any operation or if no operation is carried out for 5 seconds. During this message indication, press the STANDBY/ON button again. The projector lamp is turned off and the lamp will cool down. The POWER indica- tor blinks orange when the lamp cools down. Pressing the STANDBY/ON button has no effect while the POWER indicator is blinking.

2The system goes into the Standby mode after cooling, then the POWER indicator stops blinking and changes to orange. Check to be sure the indicator is orange then set the power switch to [0].

3The POWER indicator is extinguished when power is off. Be sure to replace the lens cap.

NOTE:

•Except in emergencies, follow the above-mentioned procedure for turning the power off. Incor- rect procedure will shorten the life of the projector lamp and LCD panel.

•To prevent any trouble, turn the projector on/off when the computer or video tape recorder is OFF. Providing a RS-232C cable is connected, turn on the computer before switching on the pro- jector.

ViewSonic PJ751

13

Image 16

Contents PJ751 Contents Troubleshooting For Your Records Features Package Contents Before USEComponent Names Component VideoRemote Control Inserting the Batteries Attaching the Strap HandleInstallation Installation of the Projector and ScreenAngle Adjustment Reference for InstallationPorts and Cables Connecting Your Devices Power ConnectionPlug & Play Connecting to a Computer Laptop computer Desktop computerConnecting to a DVD Player or VCR DVD playerConnecting to a Display Monitor RGB RGB OUTPower OFF Power onOperation Selecting an Input Signal Adjusting Image Size and FocusUsing the projectors control panel Press the Input button If selecting video input Press the Video buttonAdjusting the Volume Temporarily Muting the SoundUse the , , , buttons to adjust the position Adjusting the Image PositionPress the Position button Press the Auto button Automatic Adjustment for RGB Input Using the Automatic Adjustment FeatureAutomatic Adjustment for Video Input Correcting Keystroke Distortions Using the Magnify Feature Freezing the ScreenSelecting the Aspect Ratio Signal SearchingTemporarily Blanking the Screen Using the Menu Functions Select a menu using Buttons, then pressSelect an item using the / buttons, then press or Press the / buttons to adjust the levelOperating the PC Screen PS/2, ADB, Serial Mouse ControlOSD Menu Function Description Main MenuPicture 1 Menu Picture 2 MenuInput Menu AutoVideo HdtvScreen Menu BlankStart UP Original Turn OFFMyScreen Registration of MyScreen FullOption Menu Lamp MaintenanceLamp Life Replacing the Lamp Caring for the Air Filter Caring for the Inside of the Projector Caring for the Cabinet and Remote Control TransmitterCaring for the Lens Troubleshooting On-Screen MessagesProblem Diagnostics Come onSpecifications Outline DimensionsRGB port RGB IN1, 2 CB/PB,CR/PR Video port Audio portCustomer Support = FAXLimited Warranty ViewSonic ProjectorPower Cord Safety Guidelines AppendixFor customers in Canada For European CountriesSJT SVTCompliance Information for U.S.A Compliance Information for CanadaCompliance Information for European Countries User Information for All CountriesViewSonic Corporation