ViewSonic PJ751 manual Screen Menu, Blank, Start UP, Original Turn OFF

Screen Menu

Using the SCREEN menu, the five items shown in the Table below can be performed. Please perform each operation according to the instructions in the Table.

Example: SCREEN Menu (BLANK)

Item			Description
BLANK	Selection of BLANK Screen:
	MyScreen	ORIGINAL
	The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when
	the screen has been erased (i.e., made to vanish) by manipulating the BLANK button
	(please refer to the “Temporarily Blanking the Screen” section of the separate booklet,
	Vol. 1 (Basic)).
	MyScreen: Using the MyScreen category (see this Table, below), one can register a
	desired screen (or screens). At the time of factory shipment, this is set as a non-pat-
	terned (plain) blue color screen.
	ORIGINAL: Existing standard screens. Please make confirmation using the actual
	screen(s).
	Option screens: Various colored non-patterned (plain) screens displayed within the
	Menus.
	The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain)
	black color screen several minutes after being displayed.
START UP	Selection of START UP Screen:
	MyScreen		ORIGINAL	TURN OFF
	The START UP Screen may be voluntarily selected. The START UP Screen is displayed
	when no signal has been inputted, or when spec signals are being inputted.
	MyScreen: Using the MyScreen category (see this Table, below), one can register a
	desired screen (or screens). At the time of factory shipment, this is set as a non-pat-
	terned (plain) blue color screen.
	ORIGINAL: Existing standard screens. Please make confirmation using the actual
	screen(s).
	TURN OFF: A non-patterned (plain) blue color screen.
	The MyScreen and the ORIGINAL Screen will each change to the BLANK Screen sev-
	eral minutes after being displayed.

26 ViewSonic PJ751