ViewSonic VTMS2431 warranty Personal Computer, PC Timing Reference Chart

Page 24

Getting Started

Personal Computer

Use the LCD TV as the monitor of your computer.

The picture below shows the connection for PC. The LCD TV can also be connected to PC with DVI or HDMI output.

Rear of TV

ENGLISH

Connect to an HDMI compatible PC with the HDMI cable.

Audio cable (stereo mini plugs)

VGA 15 Pin cable

☼

•Connect the PC IN jack to the PC using a 15-pin cable and audio cable.

•If the PC is connected to TV and no signal has been input from PC for more than 5 seconds, the TV will enter standby mode automatically.

PC Timing Reference Chart

	Mode	Aspect Ratio Handling	Compatible Input
Standard	Resolution	FS*Full-Screen	RGB
	720 x 400 @ 70Hz	1920 x 1080	Yes
VESA	640 x 480 @ 60Hz	1920 x 1080	Yes
VESA	640 x 480 @ 75Hz	1920 x 1080	Yes
VESA	800 x 600 @ 60Hz	1920 x 1080	Yes
VESA	800 x 600 @ 75Hz	1920 x 1080	Yes
MAC	832 x 624 @ 75Hz	1920 x 1080	Yes
VESA	1024 x 768 @ 60Hz	1920 x 1080	Yes
VESA	1024 x 768 @ 75Hz	1920 x 1080	Yes
Apple, Mac II	1152 x 870 @ 75Hz	1920 x 1080
VESA	1280 x 768 @ 60Hz	1920 x 1080	Yes
VESA	1280 x 1024 @ 60Hz	1920 x 1080	Yes
VESA	1440 x 900 @ 60Hz	1920 x 1080	Yes
VESA	1680 x 1050 @ 60Hz	1920 x 1080	Yes
VESA	1920 x 1080 @ 60Hz	1920 x 1080	Yes

☼

•This TV’s PC VGA input does not support interlaced signals.

•For the best picture quality, we recommend that you use the signals (boldfaced) in the above

chart with a 60 Hz vertical frequency from a personal computer.

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ViewSonic

19

VTMS2431

Image 24

Contents ViewSonicTM Product Registration Customer SupportViewSonic Merida ViewSonic TV Model No ViewSonic Wall-Mount WMK-10 Kit modelContents Copyright Information Safety InstallationNotification To CustomersImportant Safety Instructions USECleaning AntennasBatteries Magnetic Influence SoundCarrying the TV VentilationInstallation MoistureVolume Adjustment LCD ScreenCompliance Information FCC StatementFollowing information is only for EU-member states Energy Star InformationDeclaration of RoHS Compliance Substance Proposed Maximum Actual ConcentrationList of Features Package ContentsInstalling the LCD TV Installing the StandDisconnecting the Stand Mounting ViewSonic LCD TV to the wall Wall Mount Kit Specifications Vesa Front View of the Product Rear View of the Product TV Input Jack 13 USBAV connection Video connectionConnecting the LCD TV Cable System or VHF/UHF Antenna SystemCable System and VHF/UHF Antenna System HD Cable Box/HD Satellite BoxDVI Connection YPbPr or Component ConnectionPC Timing Reference Chart Personal ComputerOther Equipment CableRemote Control and TV Controls Inserting Remote Control BatteriesRemote Control and TV Controls Button DescriptionNumber ButtonsZoom Button Description 18 FAV LCD TVAdjusting the Volume OperationTurning the TV On and Off Changing ChannelsStoring Channels into Memory Viewing the MenusFavorite Channel Setting Selecting the Input SourceChannel Name Setting Adding/Erasing ChannelAdjusting the Settings Setting up Time menu Closed Caption SettingUsing the Parent Controls ALL All types content Using the TV Features To Change Password To Block Unrated Movie or TV ProgramsTo Set Rating Region Table To Restore Factory Setting Setting RS232 ParameterTo block by Input Source Using PC Function Using USB Function VOL VOL +CH + Item Function Description Function Description Preivous Play/PauseNext RotateUsing the TV Features Cleaning the LCD TV Programming your Cable or Satellite Box remoteDisclaimer Troubleshooting Remote control unit does Not operateUnit cannot be operated Specifications LCDPin # Signal Remark RS232 ProtocolMale Dsub 9Pin Outside view Set-Function format Send Command Type= s Command Type= s, Only for Hdtv power onSet-Function description Reply Command Type= + or Command Type= + or -, Only for Hdtv power onReply Hex Format No Reply PC Set-function command to LCD Monitor ID=C0h Get-Function format Send Command Type= g Command Type= g, Only for Hdtv power status on standbyReply Command Type= r or Get-Function descriptionValue1 Value2 Value3 Not in the command table Send Hex Format PC Get-function command to LCD Monitor RCU Pass-through Command description To Server, then server will receive 1A Reply Hex FormatServer, then server will receive Reply Hex Format Baseline RCU Pass-through codes Limited Warranty Viewsonictm LCD TVMexico Limited Warranty ViewSonicTM