ViewSonic VS12117-1M specs

Using the TV Features

Button Description

14POWER Press this button to turn the power on from standby mode. Press it again to return to the standby mode.

15LAST Press to return to previous channel.

16▼VOL▲ Press to adjust the volume.

17LIGHT Press to lighten the remote control keys.

18MENU Press to turn the OSD (On-Screen Display) menu on. When in OSD menu, press to exit or return to the previous page.

19HDMI To select HDMI/ VGA source.

20YPbPr To select YPbPr source.

21SLEEP Press repeatedly to set the off timer. The function is used to automatically shut off the LCD TV after a preset period of time passed. There are several times for choice – Off, 10 Minutes, 20 Minutes, 30 Minutes,

40 Minutes, 50 Minutes, 60 Minutes, 90 Minutes, 120 Minutes.

22 MTS Press this button to choose the available sound output that is preset by TV broadcasting station. (EX: Mono, Stereo, SAP)

Programming the Remote Control for Other Equipment

Follow the steps below to program your TV’s remote control.

1.In the space provided below, write down the three-digit code of your equipment found on the Manufacturer’s Codes List on page 26~33.

If more than one code is listed, try entering the code listed first.

Code No. ___________________________

2.Press and hold “SET” button, and simultaneously press the device button to be set, like “DVD”, “STB”, or “AUDIO”.

3.Now the LED is on. Release all buttons you pressed.

4.Enter the three-digit code serially using “0”-“9” buttons. If you want to escape from set mode, please press device button. (If the code is not entered within 10 seconds, you must repeat step #2.)

5.After three-digit code is pressed, LED is off if the code is correct. If the code does no exist, LED will flash twice and return to set mode, please go back to step #4.

6.Complete programming.

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ENGLISH

ViewSonic

N5230p