GENERAL OPERATION
Initial System Start-Up
Be sure to press the RESET button ( 12) When using the unit for the first time, after all connections are completed correctly.
1.Turn off the unit power.
2.Press RESET with a ballpoint pen or similar pointed object.
Turning Power On and Off
Press 
button (1) or insert a disc to turn on the unit.
When system is on, press 
button (1) to turn off the unit.
Loading/Removing a Disc
1.Insert the disc into the disc slot (7) with the printed side facing up. The player will play the disc automatically.
2.Whenever press 
button (6) to eject the disc.
Adjusting the volume level
Press VOL+/VOL- button (26) to adjust the volume level.
Input Source Select
Press MODE button (3) to switch to the desired input source.
The mode will change each time the button is pressed.
.
DVD
AV
ESP Function
This unit features ESP
CD, VCD: 18 seconds MP3:160 seconds DVD: 6 seconds MPEG4: 20 seconds
Last Position Memory Feature
-During disc playback, if you press 
button (1) to turn off the unit and then press the button again to turn on the unit, the DVD unit will resume playing from the point that it was interrupted.
Reset Function
RESET button on the housing must be activated with either a ballpoint pen or thin metal object. The RESET button (12) is to be activated at the following times:
-Error symbol appears on the display. Note:
If the unit still does not function after you have pressed RESET, try cleaning the connectors which link the panel and the main housing with a cotton swab moistened with isopropyl (rubbing alcohol). If it still does not work, bring the unit to your dealer for servicing or advice.