Setup
In DVD mode, when the disc is playing or in stop mode, press SETUP button (19) to enter setup menu.
1.When the cursor is in the upper part of
the menu, use 
buttons to move between the different pages.
2.Press 
button to move the cursor to the setup page below. Then you can use
the 
buttons to move between the different setup options.
3.Press 
or ENTER button to move to the choice list of each setup option, and
then use 
buttons and ENTER button (18) to change your selection.
4.When the setting is complete, press SETUP button (19) to return to normal mode.
* When settings are changed, old settings are overwritten. Make note of the current settings before making changes. If the vehicle’s battery is disconnected, the settings will be cleared and will return to the factory settings when power is next applied.
System Setup
When you open the setup menu, you will see the system setup page at first, see below:
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
FM MODULATOR
EXIT SETUP
TV SYSTEM
TV SYSTEM is used to select the TV output mode. This player can play discs recorded in either PAL or NTSC formats. Select NTSC format, when the unit is connected to NTSC TV.
Select PAL format, when the unit is connected to PAL TV.
You can either choose AUTO SELECT, which will sense the type of monitor attached to the output and select NTSC or PAL as needed. If you know the type of monitor, you should choose the type in this menu rather than letting AUTO SELECT do it for you. This is because there may be an undesirable small delay and some flickering of the screen during the
SCREEN SAVER
As with computer monitor, video screens can “burn in” if a still image is displayed too long on the screen. This unit features a “screen saver” which produces a moving image to avoid
SETTING the TV TYPE
TV types can vary based on their aspect ratio. The common monitors fall into one of three categories:4:3 (PS/Pan and Scan), 4:3 (LB /Letterbox) or 16:9 ( Widescreen). Playing a video recorded in one aspect ratio on a monitor with a different ratio can result in some mismatches and undesirable display distortion or cutoffs. Read the following to assist you in setting up the TV type:
4:3 PS (PAN SCAN)
Select this when connected to a conventional 4:3 size monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible (when playing a 16:9 size movie).
4:3 (Pan and Scan) format is the factory default setting for this product.