2.Waiting for a moment for the player locate the track.
Playback starts from the selected chapter or track.
* This function is only available for discs on which chapter numbers are recorded.
Playing In Random Order
Press RDM button (33) to switch the random mode on/off. If the random mode is on, tracks (files) on the disc will be played in a random order.
On Screen Display Function
Press the DISP button (13) on the remote control during playback to display on- screen information about the current disc.
For DVD:
Pressing and holding DISP button (13) on the remote control to display information in the following manner.
1) TT
Displays the current title number and total title number.
2) CH
Displays the current chapter number and total chapter numbers.
3) 
Displays the playing time for the entire disc.
Displays the remaining playback time for the current chapter.
5)T:
Displays the total playback time for the current title.
Displays the remaining playback time for the current title.
7)C:
Displays the total playback time for the current chapter.
8)
Displays the current disc language, audio type, subtitle language and play angle.
For VCD:
GOTO Function
The GO TO function allows you to select a specific place in the program where you want to begin playback. The function is displayed slightly differently between DVD and VCD modes.
Press GOTO button (30), the screen will display the following message:
FOR DVD:
Use the number keys (21) to input the Track and Time then press ENTER button (18) to confirm.
ZOOM Function
Press ZOOM button (24) to increase or decrease the size of the image. Please note that the ZOOM function is only available on discs which support it.
In zoom mode, press 
, 
buttons
(16)to move pictures up/down/left/right direction in order to find the area of the picture that you want to zoom into.