PYLE Audio PLDF23 owner manual Electric Connection

ELECTRIC CONNECTION

METHOD A

Use the conversion cable to obtain DC 12V power supply input through the AC/DC ADAPTER or the cigarette lighter according to the illustrator as follows:

METHOD B

According to the illustrator below, install the unit in the car and obtain DC 12V power supply input.

MEMORY/BATTERY (B+) (YELLOW)

GROUND (B-) (BLACK)

IGNITION SWITCH (ACC+) (RED)

IR Sensor

If you need to mount the DVD player in a location which is inaccessible, or where the line-of- sight between the remote control and the face of the player is interrupted, connect the remote sensor as shown in the diagram above.

Mount the IR Sensor in a convenient location which is in direct line-of-sight with the use location of the remote control. Point the remote control at the sensor to operate the player.

User ’s Manual - page 5