Part 3-Mounting the flat panel screen
Hook the top of brackets(2) onto the top flange of wall plate(1). Then swing the screen down.
NOTE: Always use an assistant or mechanical |
| |
lifting equipment to safely lift and position | 2 | |
heavy equipment. | ||
|
Use the Locking bar(3) to prevent the TV from being removed or
accidentally knocked off of the wall plate.When the locking bar half
insertes into the wall plate , you can use the rotating rod(4) to make it fully inserted.
3
5
Part 1a-Wood Stud Mounting
Use wall plate(1) as a template, make sure it is level, and mark four mounting holes along the center lines of the wood studs. Drill four 3/16”(5mm)dia. holes 2”(50mm) deep. Level wall plate(1) and attach to wall with four long bolts(G) and four washers(I). Tighten screws firmly. Do not overtighten.
Stud finder
Wood stud
| I |
2”(50mm) | G |
Φ3/16”(5mm) |
|
|
|
|
|
|
| ||||