OPERATION
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
Note: if press RESET button, the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the front panel.
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MOD on the front panel or MODE on the remote control to select radio mode, the radio mode appears in the display together with the memory band and frequency.
SELECTING THE FREQUENCY
BAND
During radio mode, shortly press BND/LOU button on the front panel or
FM1 
FM2
FM3 
AM1
AM2 
SELECTING STATION
During radio mode, shortly press
MANU/SKIP 
button on the front panel or 
(SEEK+) button on remote control to increase frequency by one step of channel spacing, and shortly
press MANU/SKIP 
on the front panel or 
LOCAL/DISTANT
Press LOC button on the front panel or PBC (LOC) button on the remote
control to select between local and distant stations.
Local setting for reception of strong station, and a distant setting for reception of weaker stations. This function is effect during AUTO SEEK operation.
AUTOMATIC MEMORY STORING
&PROGRAM SCANNING Automatic memory storing Press AMS button on the front panel or RPT (AMS) button on the remote control for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button.
Program scanning
Press AMS or RPT (AMS) button shortly to scan preset station.
STATION STORING
Press any one of the preset buttons
(1 to 6) on the front panel to select a
station, which had been stored in the
memory. Press this button for several
seconds, current station is stored into
the number button.
MONO/STEREO
Press L/R (ST) button on the front
panel or ST (AUDIO) button on the
remote control to select mono or
stereo mode. You can sometimes
improve reception of distant stations
by selection mono operation.
17