PYLE Audio PLDVD198 owner manual Trouble Shooting

Page 29

TROUBLE SHOOTING

If it appears that your DVD unit is faulty, first consult this checklist. It may be that something simple has been overlooked.

Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player.

NO POWER

If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”.

Check if the fuse is blown. Then replace the new fuse.

Check if the on/off button on the front of the player is set to on.

NO PICTURE

Check if the monitor or TV is switched on.

Check if select proper mode, such as Disc Play mode and AV mode. Check the video connection.

DISTORTED PICTURE

Check the disc for fingerprints and clean with soft cloth, wiping from centre to edge.

Sometimes a small amount of picture distortion may appear. This is not a malfunction.

COMPLETELY DISTORTED PICTURE

The disc format is not according to the TV-set used (PAL/NTSC).

NO COLOR IN PICTURE

The disc format is not according to the TV-set used (PAL/NTSC).

DISC DOES NOT PLAY

Ensure the disc label is upwards. Clean the disc.

Check if the disc is defective by trying another disc.

NO SOUND

Check audio connections.

If using a HIFI amplifier, try another

sound source.

DISTORTED SOUND FROM HIFI

AMPLIFIER

Check to make sure that no audio

connections are made to the amplifier

phono input.

THE PLAYER DOES NOT RESPOND

TO THE REMOTE CONTROL

Aim the remote control directly at the sensor on the front of the player. Avoid all obstacles which may interfere with the signal path. Inspect or replace the remote control battery.

DISTORTED OR B/W PICTURE

The disc format is not according to the TV-set used (PAL/NTSC).

NO AUDIO AT DIGITAL OUTPUT

Check the digital connections

Check the Digital Audio menu to make sure that the digital output is correctly set.

Check if the audio format of the selected audio language matches your receiver's capabilities.

BUTTONS DO NOT WORK

Press Reset button on the housing of the DVD unit.

THE RADIO DOES NOT WORK

Check if the antenna cable is

connected firmly.

THE RADIO STATION AUTOMATIC

SELECTION DOES NOT WORK

If the signals are too weak, select a

station manually.

29

Image 29
Contents PLDVD198 Compatible with Ntsc DVD Video CD FeaturesContents Region Management Information Safety InformationMP3 Disc NotesInstallation Opening InstallationInstalling the unit DIN FRONT/REAR-MOUNTRemoving the unit DIN REAR-MOUNT Method B Metal strap are not used For method B installationPrecautions when handling Using the Detachable Front PanelInstalling the Front Panel Removing the Front PanelAntenna Socketoptional Wiring Connection PIN Socket ConnectionLocation and Function of Keys When remove the front panelLocation and Function of Keys Remote ControlPower Preparing the Remote Control Remote ControlUsing the Remote Control Inserting the BatteriesEjecting a Disc LOADING/EJECTING a DiscLoading a Disc Operation Selecting the Frequency Band Radio Operation Switching to Radio ModeSelecting Station LOCAL/DISTANTDisc DVD/VCD/CD/MP3 Operation Time Search Goto Repeating Playing a PassageZoom Function Playing in Random Order not For DVDFor CD MULTI-SUBTITLE Languages MULTI-AUDIO Languages FunctionStop button pressed AV in OperationGeneral Setup SetupInitial Setup OSD Lang type setup PIC mode setupCaptions setup Angle Mark display setupAudio Setup SCR Saver setupOP Mode SpdifTV type setup Preferences SetupDynamic range Control PRO LogicParental Audio language setupSubtitle language setup Defaults PasswordTrouble Shooting General SpecificationsCD Player RadioAudio output level 10k 2 ch 2.0 Vrms Power output X4 0W Signal systemSupply voltage Current consumption Less than 2A88-V1005-01