PYLE Audio PLDVD198 DIN REAR-MOUNT Method B, Metal strap are not used For method B installation

INSTALLATION

DIN REAR-MOUNT (Method B)

If your vehicle is a Nissan, Toyota, follow these mounting instructions.

Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle.

Side View showing

Screw Holes marked

T, N

Screw

Factory Radio

Mounting Bracket

Screw

Hook Dashboard or Console

To fasten the unit to the factory radio mounting brackets.

1.Use a screwdriver to loose the hook's screws on the front left and right sides of the unit and remove the hooks.

2.Align the screw holes on the bracket with the screw holes on the unit, and then tighten the screws (5x5mm)on each side.

Note: the outer trim ring, sleeve

and the metal strap are not used

for method B installation.

8