Remote Control
In This Chapter
This section provides a detailed explanation on using remote control functions with your card.
DashBoard Control System Software
The DashBoard Control System enables you to monitor and control openGearTM frames and controller cards from a computer. The DashBoard software and manual can be downloaded from the Cobalt Digital Inc. website.
Using the Menus
You must first install the DashBoard Control System software on your computer. Refer to the DashBoard User Manual for software installation procedures and for using the DashBoard interface.
The Menu System
The following table and sections describe the menus, items, and parameters available from the DashBoard Control System software for the card.
Table 3. DashBoard Menus
Menu | Item | Format | Description |
|
|
|
|
Card Info | Product | The product name | |
|
|
| |
| Manufacturer | Cobalt Digital Inc. | The manufacturer of the |
|
|
| product |
| Software Release | ### | The release number of the |
| Number |
| firmware in this card |
| Software Build | ### | The internal build number |
| Date |
| of this software |
| Software Build | ### | The date and time the |
| Time |
| software was created |
| +12 V Power Rail | #.## W | Positive Supply Power |
|
|
|
|
| #.## W | Negative Supply Power | |
|
|
|
|
| Video Input | ############ | Detected Video Standard |
| Standard | on SDI or Analog Input | |
|
|
Page 20 of 28 | 9323 Owner’s Manual • (V 2.1) |